公共电网动力配电成套设备检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

GB/T 7251.5-2017 低压开关和控制 第5部分:

Low-voltage switchgear and controlgear assemblies—Part 5: Assemblies for power distribution in public networks

GB 7251.5-2017 低压开关和控制 第5部分:

Low-voltage switchgear and control equipment Part 5: Public grid power distribution equipment

GB 7251.5-2008 低压开关和控制.第5部分:对的特殊要求

公用电网动力配电变电站电缆配电盘(SCDBs)和电缆分线箱(CDCs)应符合GB 7251.1-2005的要求,并应遵守本部分的特殊要求。 本部分给出了变电站电缆配电盘(SCDBs)和电缆分线箱(CDCs)的补充要求,此装置为固定安装的型式试验的成套设备(TTA),用于三相系统的电能分配。本部分

Low-voltage switchgear and controlgear assemblies.Part 5:Particular requirements for assemblies for power distribution in public networks

GB/T 7251.5-2008 低压开关和控制 第5部分: 对的特殊要求

Low-voltage switchgear and controlgear assemblies - Part 5:Particular requirements for assemblies for power distribution in public networks

GOST R 51321.5-2011 低压开关和控制.第5部分:对的特殊要求

Low-voltage switchgear and controlgear assemblies. Part 5. Particular requirements for low-voltage assemblies for power distribution in public networks (distribution cabinets and boarts)

GB 7251.5-1998 低压开关和控制 第五部分;对户外场所的 缆分线箱(CDCs)的特殊要求

本标准为电缆分线箱(CDCs)制定了补充要求,此装置为户外安装的型式试验的成套设备(TTA),安装在公共场所,但只有专业人员在使用时才能接触到。它用于公用三相系统中。 注 1如果电缆分线箱(CDCs)还包括了附加的设备(例如仪表等),这样可以认为其主要功能有所改变,则可根据制造厂

Low-voltage switchgear and controlgear assemblies Part 5: Particular requirements for assemblies intended to be installed outdoors in public places--Cable distribution cabinets (CDCs)for power distribution in networks

T/WHDQHX 003-2021 基于物联的智能

由我协会会员单位湖北长江电气有限公司牵头,联合中国质量认证中心武汉分中心、湖北省电力装备有限公司、湖北省工业建筑集团安装工程有限公司、武汉市武昌电控设备有限公司等多家单位共同编制了团体标准《基于物联网的智能成套配电设备》,用以指导本行业生产企业设计、生产、安装、调试智能成套配电设备产品。主要技术内容

The smart power distribution equipment based on IoT

IEC 61439-5:2014 低压开关和控制件.第5部分:

Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks

KS C IEC 61439-5:2015 低压开关和控制件.第5部分:

Low-voltage switchgear and controlgear assemblies — Part 5: Assemblies for power distribution in public networks

IEC 61439-5:2010 低压开关和控制件.第5部分:

This clause of Part 1 applies with the following additions. Addition: This standard gives specific requirements for public electricity network

Low-voltage switchgear and controlgear assemblies.Part 5: Assemblies for power distribution in public networks

BS EN IEC 61439-5:2023 低压开关和控制组件 组件

Low-voltage switchgear and controlgear assemblies. Assemblies for power distribution in public networks

GB/T 40823-2021 站用紧凑型(CEADS)

本文件规定了配电变电站用紧凑型成套设备的使用条件、额定值、设计与结构、试验及选用导则等内容。 本文件适用于额定频率50 Hz,高压侧交流额定电压3.6kV~40.5kV,采用适当内部连接的高压/低压配电变电站的主电气功能单元构成的成套设备。该成套设备可通过电缆与电网连接,且可安装在户内或户外封闭电气

Compact equipment assembly for distribution substation(CEADS)

DIN EN 50160:2008 压特性

Voltage characteristics of electricity supplied by public distribution networks; German version EN 50160:2007

DIN EN 50160:2022-10 压特性

Voltage characteristics of electricity supplied by public distribution networks; German and English version prEN 50160:2021 / Note: Date of issue 2022-09-30*Intended as replacement for DIN EN 50160 (2020-11).

DIN VDE V 0126-1-1:2013 发机和低压之间的自断开

Automatic disconnection device between a generator and the public low-voltage grid

GB/T 7251.5-2017 低压开关和控制 第5部分:

Low-voltage switchgear and controlgear assemblies—Part 5: Assemblies for power distribution in public networks

GB 7251.5-2017 低压开关和控制 第5部分:

Low-voltage switchgear and control equipment Part 5: Public grid power distribution equipment

GB 7251.5-2008 低压开关和控制.第5部分:对的特殊要求

公用电网动力配电变电站电缆配电盘(SCDBs)和电缆分线箱(CDCs)应符合GB 7251.1-2005的要求,并应遵守本部分的特殊要求。 本部分给出了变电站电缆配电盘(SCDBs)和电缆分线箱(CDCs)的补充要求,此装置为固定安装的型式试验的成套设备(TTA),用于三相系统的电能分配。本部分

Low-voltage switchgear and controlgear assemblies.Part 5:Particular requirements for assemblies for power distribution in public networks

GB/T 7251.5-2008 低压开关和控制 第5部分: 对的特殊要求

Low-voltage switchgear and controlgear assemblies - Part 5:Particular requirements for assemblies for power distribution in public networks

GOST R 51321.5-2011 低压开关和控制.第5部分:对的特殊要求

Low-voltage switchgear and controlgear assemblies. Part 5. Particular requirements for low-voltage assemblies for power distribution in public networks (distribution cabinets and boarts)

GB 7251.5-1998 低压开关和控制 第五部分;对户外场所的 缆分线箱(CDCs)的特殊要求

本标准为电缆分线箱(CDCs)制定了补充要求,此装置为户外安装的型式试验的成套设备(TTA),安装在公共场所,但只有专业人员在使用时才能接触到。它用于公用三相系统中。 注 1如果电缆分线箱(CDCs)还包括了附加的设备(例如仪表等),这样可以认为其主要功能有所改变,则可根据制造厂

Low-voltage switchgear and controlgear assemblies Part 5: Particular requirements for assemblies intended to be installed outdoors in public places--Cable distribution cabinets (CDCs)for power distribution in networks

T/WHDQHX 003-2021 基于物联的智能

由我协会会员单位湖北长江电气有限公司牵头,联合中国质量认证中心武汉分中心、湖北省电力装备有限公司、湖北省工业建筑集团安装工程有限公司、武汉市武昌电控设备有限公司等多家单位共同编制了团体标准《基于物联网的智能成套配电设备》,用以指导本行业生产企业设计、生产、安装、调试智能成套配电设备产品。主要技术内容

The smart power distribution equipment based on IoT

IEC 61439-5:2014 低压开关和控制件.第5部分:

Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks

KS C IEC 61439-5:2015 低压开关和控制件.第5部分:

Low-voltage switchgear and controlgear assemblies — Part 5: Assemblies for power distribution in public networks

IEC 61439-5:2010 低压开关和控制件.第5部分:

This clause of Part 1 applies with the following additions. Addition: This standard gives specific requirements for public electricity network

Low-voltage switchgear and controlgear assemblies.Part 5: Assemblies for power distribution in public networks

BS EN IEC 61439-5:2023 低压开关和控制组件 组件

Low-voltage switchgear and controlgear assemblies. Assemblies for power distribution in public networks

GB/T 40823-2021 站用紧凑型(CEADS)

本文件规定了配电变电站用紧凑型成套设备的使用条件、额定值、设计与结构、试验及选用导则等内容。 本文件适用于额定频率50 Hz,高压侧交流额定电压3.6kV~40.5kV,采用适当内部连接的高压/低压配电变电站的主电气功能单元构成的成套设备。该成套设备可通过电缆与电网连接,且可安装在户内或户外封闭电气

Compact equipment assembly for distribution substation(CEADS)

DIN EN 50160:2008 压特性

Voltage characteristics of electricity supplied by public distribution networks; German version EN 50160:2007

DIN EN 50160:2022-10 压特性

Voltage characteristics of electricity supplied by public distribution networks; German and English version prEN 50160:2021 / Note: Date of issue 2022-09-30*Intended as replacement for DIN EN 50160 (2020-11).

DIN VDE V 0126-1-1:2013 发机和低压之间的自断开

Automatic disconnection device between a generator and the public low-voltage grid

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。

VR实验室引导 VR实验室 →