土壤、固体废弃物检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

BS EN 15935:2012 污泥,处理后的生,.强热失量测定

Sludge, treated biowaste, soil and waste. Determination of loss on ignition

EN 15935:2012 污泥,处理后的生,.强热失量测定

This European Standard specifies a method for the determination of the loss on ignition (LOI) of dry matter at 550 ℃. The dry matter is determined

Sludge, treated biowaste, soil and waste - Determination of loss on ignition

EN 15935:2021 污泥,处理后的生,.强热失量测定

Soil, waste, treated biowaste and sludge - Determination of loss on ignition

DIN 19742:2014 质. 使用气相色谱质谱法 (GC-MS) 对提取和含量测定后的污泥, 泥沙, 以及中选定邻苯二甲酸酯含量的测定

Soil quality - Determination of selected phthalates in sludge, sediment, solid waste and soil after extraction and determination using gas chromatography mass spectrometry (GC-MS)

T/CSTM 00548-2022 高强轻骨料

本文件规定了固体废弃物高强轻骨料的术语和定义、分类及标记、原材料、技术要求、试验方法、检验规则以及标识、包装、运输和贮存等。 本文件适用于采用固体废弃物为主要原料,经配料、制粒、焙烧等而成的、用于配制混凝土及混凝土制品(预应力混凝土除外)的高强轻骨料

Light aggregate with high strength prepared from solid waste

TCVN 6705-2009 一般.分类

Normal solid wastes.Classification

BS EN 16377:2013 特性.中溴化阻燃剂(BFR)的测定

Characterization of waste. Determination of brominated flame retardants (BFR) in solid waste

ASTM D5198-92(2003 的硝酸处理

A knowledge of the inorganic composition of a waste is often required for the selection of appropriate waste disposal practices. Solid

Standard Practice for Nitric Acid Digestion of Solid Waste

T/WSWXH 006-2022 种植腐熟及培肥技术规程

本文件共分8章,主要包括范围、规范性引用文件、术语和定义、发酵场地、发酵物料及设备、配置腐熟物料、种植废弃物腐熟程度判定、种植废弃物腐熟后肥料还田培肥技术内容

Technical rules for composting of plant wastes and soil fertilization

BS EN 15192:2007 用碱性消化法和带分光光度探测的离子色谱法测定材料和中铬(VI)含量 此方法可测定铬(VI)的质量分数大于0.1mg/kg的

Characterisation of waste and soil - Determination of chromium (VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection

BS EN 15192:2006 用碱性消化法和带分光光度探测的离子色谱法测定材料和中铬(VI)含量.此方法可测定铬(VI)的质量分数大于0.1mg/kg的

This standard describes the determination of Cr(VI) in solid waste material and soil by alkaline digestion and ion chromatography

This standard describes the determination of Cr(VI) in solid waste material and soil by alkaline digestion and ion chromatography with spectrophotometric detection. This method can be used to determine Cr(VI)-mass fractions in solids higher than 0,1 mg/kg

CNS 13348-1994 pH值之测定法

本标准规定含石灰质(calcareous)或非石灰质(non-calcareous)固体废弃物pH值之测定方法

Method of Test for pH Valve of Solid Waste

BS EN 15936:2012 污泥, 经处理生, . 采用干烧法对有机碳总量的测定

Sludge, treated biowaste, soil and waste. Determination of total organic carbon (TOC) by dry combustion

LST EN 15936-2012 污泥、处理过的生 通过干法燃烧测定总有机碳(TOC)

Sludge, treated biowaste, soil and waste - Determination of total organic carbon (TOC) by dry combustion

DS/EN 15936:2012 污泥、处理过的生 通过干法燃烧测定总有机碳(TOC)

This European Standard specifies two methods for the determination of total organic carbon (TOC) in sludge, treated biowaste, soil, waste and sediment

Sludge, treated biowaste, soil and waste - Determination of total organic carbon (TOC) by dry combustion

BS EN 15935:2012 污泥,处理后的生,.强热失量测定

Sludge, treated biowaste, soil and waste. Determination of loss on ignition

EN 15935:2012 污泥,处理后的生,.强热失量测定

This European Standard specifies a method for the determination of the loss on ignition (LOI) of dry matter at 550 ℃. The dry matter is determined

Sludge, treated biowaste, soil and waste - Determination of loss on ignition

EN 15935:2021 污泥,处理后的生,.强热失量测定

Soil, waste, treated biowaste and sludge - Determination of loss on ignition

DIN 19742:2014 质. 使用气相色谱质谱法 (GC-MS) 对提取和含量测定后的污泥, 泥沙, 以及中选定邻苯二甲酸酯含量的测定

Soil quality - Determination of selected phthalates in sludge, sediment, solid waste and soil after extraction and determination using gas chromatography mass spectrometry (GC-MS)

T/CSTM 00548-2022 高强轻骨料

本文件规定了固体废弃物高强轻骨料的术语和定义、分类及标记、原材料、技术要求、试验方法、检验规则以及标识、包装、运输和贮存等。 本文件适用于采用固体废弃物为主要原料,经配料、制粒、焙烧等而成的、用于配制混凝土及混凝土制品(预应力混凝土除外)的高强轻骨料

Light aggregate with high strength prepared from solid waste

TCVN 6705-2009 一般.分类

Normal solid wastes.Classification

BS EN 16377:2013 特性.中溴化阻燃剂(BFR)的测定

Characterization of waste. Determination of brominated flame retardants (BFR) in solid waste

ASTM D5198-92(2003 的硝酸处理

A knowledge of the inorganic composition of a waste is often required for the selection of appropriate waste disposal practices. Solid

Standard Practice for Nitric Acid Digestion of Solid Waste

T/WSWXH 006-2022 种植腐熟及培肥技术规程

本文件共分8章,主要包括范围、规范性引用文件、术语和定义、发酵场地、发酵物料及设备、配置腐熟物料、种植废弃物腐熟程度判定、种植废弃物腐熟后肥料还田培肥技术内容

Technical rules for composting of plant wastes and soil fertilization

BS EN 15192:2007 用碱性消化法和带分光光度探测的离子色谱法测定材料和中铬(VI)含量 此方法可测定铬(VI)的质量分数大于0.1mg/kg的

Characterisation of waste and soil - Determination of chromium (VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection

BS EN 15192:2006 用碱性消化法和带分光光度探测的离子色谱法测定材料和中铬(VI)含量.此方法可测定铬(VI)的质量分数大于0.1mg/kg的

This standard describes the determination of Cr(VI) in solid waste material and soil by alkaline digestion and ion chromatography

This standard describes the determination of Cr(VI) in solid waste material and soil by alkaline digestion and ion chromatography with spectrophotometric detection. This method can be used to determine Cr(VI)-mass fractions in solids higher than 0,1 mg/kg

CNS 13348-1994 pH值之测定法

本标准规定含石灰质(calcareous)或非石灰质(non-calcareous)固体废弃物pH值之测定方法

Method of Test for pH Valve of Solid Waste

BS EN 15936:2012 污泥, 经处理生, . 采用干烧法对有机碳总量的测定

Sludge, treated biowaste, soil and waste. Determination of total organic carbon (TOC) by dry combustion

LST EN 15936-2012 污泥、处理过的生 通过干法燃烧测定总有机碳(TOC)

Sludge, treated biowaste, soil and waste - Determination of total organic carbon (TOC) by dry combustion

DS/EN 15936:2012 污泥、处理过的生 通过干法燃烧测定总有机碳(TOC)

This European Standard specifies two methods for the determination of total organic carbon (TOC) in sludge, treated biowaste, soil, waste and sediment

Sludge, treated biowaste, soil and waste - Determination of total organic carbon (TOC) by dry combustion

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。

VR实验室引导 VR实验室 →