主电路用接插件检测

JB/T 10323-2002 低压抽出式成套开关设备和控制设备.主电路用接插件

本标准规定了低压抽出式成套开关设备的控制设备主电路用接插件的型号和分类、技术要求、试验方法、检验规则和标志、包装、运输与贮存条件。 　　本标准适用于额定电压交流660V及以下、频率50Hz(或60Hz)或直流440V及以下的低压抽出式成套开关设备和控制设备主电路用接插件

Connectors for low-voltage withdrawable switchgear and controlgear assemblies main circuit

JB/T 10323-2016 低压抽出式成套开关设备和控制设备主电路用接插件

Connectors for main circuits of low-voltage withdrawable complete sets of switchgear and control equipment

ANSI/SCTE 156-2008 主线路插头连接电缆接口用规范

The primary purpose of this specification is to assure acceptable electrical, mechanical and environmental performance of the cable and connector

Specification for Mainline Plug (Male) to Cable Interface

NF C83-401:1987 电子元件双面和边缘接插件印刷电路板用

Electronic Components Two parts and edge socket connectors for printed board application

Electronic Components Two parts and edge socket connectors for printed board application

NF UTE C93-427:1983 电子元件连接元件集成电路和其它插入元件用插座详细要求

Electronic Components Connecting devices Sockets for integrated circuits and others plug-in components Detail Requirements

Electronic Components Connecting devices Sockets for integrated circuits and others plug-in components Detail Requirements

NF C93-427:1983 电子元件.连接装置.集成电路和其它插入元件用插座.一般要求

Electronic components. Connecting devices. Sockets for integrated circuit and others plug-in components. General requirements.

DLA MIL-DTL-55302/26 G-2008 连接器.印刷电路组件和附件.印刷电路板用30-140接触位插头(100SQ网格)

CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, 30 thru 140 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.100 SQ. GRID)

BS 3101:1986 主要用于煤矿与防爆式限动插头插座联用的控制电路和联锁电路规范

Specifies characteristics and operating conditions, to ensure that components of control units both local and remote from the supply and control unit

Specification for control and interlock circuits primarily associated with flameproof restrained plugs and sockets for use in coal mines

NF C93-401:1985 电子元件.双部件和棱形插座.印制电路板用连接器

Electronic components. Two part and edge socket. Connectors for printed board application.

DLA MIL-DTL-55302/70 D (1)-2010 连接器，印刷电路组件和附件，插针，直角插头，电气，用于印刷线路板的极化（0.100 间距）

CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PIN, RIGHT ANGLE PLUG, ELECTRICAL, POLARIZED FOR PRINTED WIRING BOARDS (.100 SPACING)

DLA MIL-DTL-55302/2 F (2)-2013 连接器、印刷电路组件和附件：插座、插座触点、直通、用于印刷线路板（0.150 间距）

CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, STRAIGHT-THRU, FOR PRINTED WIRING BOARDS (.150 SPACING)

DLA MIL-DTL-55302/2 F-2008 连接器、印刷电路组件和附件：插座、插座触点、直通、用于印刷线路板（0.150 间距）

CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, STRAIGHT-THRU, FOR PRINTED WIRING BOARDS (.150 SPACING)

JB/T 5843-2005 电力半导体器件用接插件

本标准规定了电力半导体器件用接插件的型号、尺寸、技术要求、检验规则和包装、运输、贮存、标志等要求。 本标准适用于电力半导体器件辅助阴极和门极用接插件

Connectors for power semiconductor devices

JB/T 5843-1991 电力半导体器件用接插件

Connectors for Power Semiconductor Devices

SANS 1327:2004 牵引车和半挂车用电气接插件（7针接插件）

Covers two types of 7-pole electrical connectors in the form of a socket and a plug that will permit interchangeability of electrical connections

Electrical connectors for towing and towed vehicles (7-pole connectors)

JB/T 10323-2002 低压抽出式成套开关设备和控制设备.主电路用接插件

本标准规定了低压抽出式成套开关设备的控制设备主电路用接插件的型号和分类、技术要求、试验方法、检验规则和标志、包装、运输与贮存条件。 　　本标准适用于额定电压交流660V及以下、频率50Hz(或60Hz)或直流440V及以下的低压抽出式成套开关设备和控制设备主电路用接插件

Connectors for low-voltage withdrawable switchgear and controlgear assemblies main circuit

JB/T 10323-2016 低压抽出式成套开关设备和控制设备主电路用接插件

Connectors for main circuits of low-voltage withdrawable complete sets of switchgear and control equipment

ANSI/SCTE 156-2008 主线路插头连接电缆接口用规范

The primary purpose of this specification is to assure acceptable electrical, mechanical and environmental performance of the cable and connector

Specification for Mainline Plug (Male) to Cable Interface

NF C83-401:1987 电子元件双面和边缘接插件印刷电路板用

Electronic Components Two parts and edge socket connectors for printed board application

Electronic Components Two parts and edge socket connectors for printed board application

NF UTE C93-427:1983 电子元件连接元件集成电路和其它插入元件用插座详细要求

Electronic Components Connecting devices Sockets for integrated circuits and others plug-in components Detail Requirements

Electronic Components Connecting devices Sockets for integrated circuits and others plug-in components Detail Requirements

NF C93-427:1983 电子元件.连接装置.集成电路和其它插入元件用插座.一般要求

Electronic components. Connecting devices. Sockets for integrated circuit and others plug-in components. General requirements.

DLA MIL-DTL-55302/26 G-2008 连接器.印刷电路组件和附件.印刷电路板用30-140接触位插头(100SQ网格)

CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, 30 thru 140 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.100 SQ. GRID)

BS 3101:1986 主要用于煤矿与防爆式限动插头插座联用的控制电路和联锁电路规范

Specifies characteristics and operating conditions, to ensure that components of control units both local and remote from the supply and control unit

Specification for control and interlock circuits primarily associated with flameproof restrained plugs and sockets for use in coal mines

NF C93-401:1985 电子元件.双部件和棱形插座.印制电路板用连接器

Electronic components. Two part and edge socket. Connectors for printed board application.

DLA MIL-DTL-55302/70 D (1)-2010 连接器，印刷电路组件和附件，插针，直角插头，电气，用于印刷线路板的极化（0.100 间距）

CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PIN, RIGHT ANGLE PLUG, ELECTRICAL, POLARIZED FOR PRINTED WIRING BOARDS (.100 SPACING)

DLA MIL-DTL-55302/2 F (2)-2013 连接器、印刷电路组件和附件：插座、插座触点、直通、用于印刷线路板（0.150 间距）

CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, STRAIGHT-THRU, FOR PRINTED WIRING BOARDS (.150 SPACING)

DLA MIL-DTL-55302/2 F-2008 连接器、印刷电路组件和附件：插座、插座触点、直通、用于印刷线路板（0.150 间距）

CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, STRAIGHT-THRU, FOR PRINTED WIRING BOARDS (.150 SPACING)

JB/T 5843-2005 电力半导体器件用接插件

本标准规定了电力半导体器件用接插件的型号、尺寸、技术要求、检验规则和包装、运输、贮存、标志等要求。 本标准适用于电力半导体器件辅助阴极和门极用接插件

Connectors for power semiconductor devices

JB/T 5843-1991 电力半导体器件用接插件

Connectors for Power Semiconductor Devices

SANS 1327:2004 牵引车和半挂车用电气接插件（7针接插件）

Covers two types of 7-pole electrical connectors in the form of a socket and a plug that will permit interchangeability of electrical connections

Electrical connectors for towing and towed vehicles (7-pole connectors)