塑料与制品检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

GB/T 41010-2021 生物降解降解性能及标识要求

本文件规定了生物降解塑料与制品的降解性能和标识要求。具体制品除降解性能外的其他性能应符合该产品标准的要求。 本文件适用于下列各类生物降解塑料与制品: ———天然高分子材料; ———合成聚合物; ———含有如增塑剂、颜料或其他化合物等添加剂的材料; ———以上材料的混合物; ———各类生物降解材料加工

Degradability and identification requirements of biodegradable plastics and products

0 经济型容器.通用规范

CNS 4665-1984 嵌入螺帽(长型封闭式,嵌于压铸件内用)

本标准适用于长型封闭式嵌于塑料制品或压铸件内之嵌入螺帽

Insert Nuts Heavy Type for Plastics Mouldings and Pressure Die Castings with Dead Hole

GM GM9141P-2003 白色乙烯基和白色皮革和皮革的兼容性

Compatibility of Plastic Rolled Goods and Leather to White Vinyl and to White Leather (Revision C)

CB/T 3825-1998 橡胶、及其物资分类代码

本标准规定了船舶工业使用的橡胶、塑料及其制品的物资分类与代码。 本标准适用于船舶工业物资管理、成本财务、生产计划、产品设计等部门进行信息交换与处理

Material classification and code for rubber,plastic and their products

ISO 13079:2011 试验室玻璃.使用魏氏法测量红细胞沉降率用管

Laboratory glass and plastics ware - Tubes for the measurement of the erythrocyte sedimentation rate by the Westergren method

NF T51-072:1993 .小火源接触的水平及垂直试样燃烧性能的测定

Plastics. Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source.

NF T51-076*NF EN ISO 9773:1998 小火源接触的薄式挠性垂直试样燃烧性能的测定

Plastics. Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source.

DIN 53756:1974 的检验.化学物质接触情况下的贮存试验

Testing of plastics; storage test in contact with chemicals

Testing of plastics; storage test in contact with chemicals

NF T51-730:1972 .由于剂的接触用移动法测定聚乙烯电介质性能的变化

Plastics. Determination of changes in dielectical properties of polyethylene by migration due to contact with a plasticized material.

BS EN 2561:1995 碳素纤维增强的.向的层压.平行纤维方向的抗拉试验

This standard specifies the method of determination of the ultimate tensile strength, tensile modulus and, if required, the Poisson's ratio and strain

Carbon fibre reinforced plastics - Undirectional laminates - Tensile test parallel to the fibre direction

NO 10/2011-2011 接触的的委员会法规(欧洲经济区相关的文本)

COMMISSION REGULATION on plastic materials and articles intended to come into contact with food (Text with EEA relevance)

2002/72/EC-2002 欧盟委员会关于接触的的指令(经2004/19/EC修订)

COMMISSION DIRECTIVE relating to plastic materials and articles intended to come into contact with foodstuffs

2004/19/EC-2004 欧盟委员会对关于接触的指令2002/72/EC进行修订的指令(内容欧洲经济区(EEA)相关)

COMMISSION DIRECTIVE amending Directive 2002/72/EC relating to plastic materials and articles intended to come into contact with foodstuffs

ARMY MIL-HDBK-700 A-1975

This commercial item description covers brown kraft paper used for general wrapping applications

PLASTICS

GB/T 41010-2021 生物降解降解性能及标识要求

本文件规定了生物降解塑料与制品的降解性能和标识要求。具体制品除降解性能外的其他性能应符合该产品标准的要求。 本文件适用于下列各类生物降解塑料与制品: ———天然高分子材料; ———合成聚合物; ———含有如增塑剂、颜料或其他化合物等添加剂的材料; ———以上材料的混合物; ———各类生物降解材料加工

Degradability and identification requirements of biodegradable plastics and products

0 经济型容器.通用规范

CNS 4665-1984 嵌入螺帽(长型封闭式,嵌于压铸件内用)

本标准适用于长型封闭式嵌于塑料制品或压铸件内之嵌入螺帽

Insert Nuts Heavy Type for Plastics Mouldings and Pressure Die Castings with Dead Hole

GM GM9141P-2003 白色乙烯基和白色皮革和皮革的兼容性

Compatibility of Plastic Rolled Goods and Leather to White Vinyl and to White Leather (Revision C)

CB/T 3825-1998 橡胶、及其物资分类代码

本标准规定了船舶工业使用的橡胶、塑料及其制品的物资分类与代码。 本标准适用于船舶工业物资管理、成本财务、生产计划、产品设计等部门进行信息交换与处理

Material classification and code for rubber,plastic and their products

ISO 13079:2011 试验室玻璃.使用魏氏法测量红细胞沉降率用管

Laboratory glass and plastics ware - Tubes for the measurement of the erythrocyte sedimentation rate by the Westergren method

NF T51-072:1993 .小火源接触的水平及垂直试样燃烧性能的测定

Plastics. Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source.

NF T51-076*NF EN ISO 9773:1998 小火源接触的薄式挠性垂直试样燃烧性能的测定

Plastics. Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source.

DIN 53756:1974 的检验.化学物质接触情况下的贮存试验

Testing of plastics; storage test in contact with chemicals

Testing of plastics; storage test in contact with chemicals

NF T51-730:1972 .由于剂的接触用移动法测定聚乙烯电介质性能的变化

Plastics. Determination of changes in dielectical properties of polyethylene by migration due to contact with a plasticized material.

BS EN 2561:1995 碳素纤维增强的.向的层压.平行纤维方向的抗拉试验

This standard specifies the method of determination of the ultimate tensile strength, tensile modulus and, if required, the Poisson's ratio and strain

Carbon fibre reinforced plastics - Undirectional laminates - Tensile test parallel to the fibre direction

NO 10/2011-2011 接触的的委员会法规(欧洲经济区相关的文本)

COMMISSION REGULATION on plastic materials and articles intended to come into contact with food (Text with EEA relevance)

2002/72/EC-2002 欧盟委员会关于接触的的指令(经2004/19/EC修订)

COMMISSION DIRECTIVE relating to plastic materials and articles intended to come into contact with foodstuffs

2004/19/EC-2004 欧盟委员会对关于接触的指令2002/72/EC进行修订的指令(内容欧洲经济区(EEA)相关)

COMMISSION DIRECTIVE amending Directive 2002/72/EC relating to plastic materials and articles intended to come into contact with foodstuffs

ARMY MIL-HDBK-700 A-1975

This commercial item description covers brown kraft paper used for general wrapping applications

PLASTICS

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。

VR实验室引导 VR实验室 →