钼检测

BS 2TA 50-2009 钛-铝-钼-锡-硅合金锻坯规范(抗拉强度1000-1200 MPa)(限定等圆断面大于100 mm至150 mm并包括150 mm)

This standard specifies requirements for titanium-aluminiummolybdenum-tin-silicon alloy forging stock with a tensile strength of 1 000 to 1 200 MPa

Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 MPa) (limiting ruling section over 100 mm up to and including 150 mm)

BS 2HR 206-2009 镍-钴-铬-钼-钛-铝热阻的合金板材、片材和带材规范（镍基合金，钴 20、钼 5.9、钛 2.1、铝 0.5）

This British Standard specifies requirements for nickel-cobaltchromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip

Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)

BS 2TA 41-2009 钛-铝-钼-锡-硅-碳合金锻坯规范(抗拉强度1205-1375 MPa)(限定等圆断面大于25mm至75mm并包括75mm)

This British Standard specifies requirements for titanium-aluminiummolybdenum-tin-silicon-carbon alloy forging stock with a tensile strength of 1 205

Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to and including 75 mm)

BS 2TA 49-2009 钛-铝-钼-锡-硅-碳合金生产的板材和型材规范(抗拉强度1000-1200 MPa)(限定等圆断面大于100 mm至150 mm并包括150 mm)

This standard specifies requirements for titanium-aluminiummolybdenum-tin-silicon alloy bar and section with a tensile strength of 1 000 MPa to 1 200

Specification for bar and section for machining of titanium-aluminium- molybdenum-tin-silicon-carbon alloy (Tensile strength 1000-1200 MPa) (Limiting ruling section over 100 mm up to and including 150 mm)

BS 2TA 39-2009 钛铝钼锡硅碳合金锻坯规范(抗拉强度1250-1420MPa)(限定等圆断面25mm)

This British Standard specifies requirements for titanium-aluminiummolybdenum-tin-silicon-carbon alloy forging stock with a tensile strength of 1 250

Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1250-1420 MPa) (limiting ruling section 25 mm)

BS 2TA 47-2009 钛-铝-钼-锡-硅合金锻坯规范(抗拉强度1050-1220 MPa)(限定等圆断面100 mm)

This standard specifies requirements for titanium-aluminiummolybdenum-tin-silicon alloy forging stock with a tensile strength of 1 050 MPa to 1 220

Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 MPa) (limiting ruling section 100 mm)

BS 2HR 204-2009 镍-铬-铁-钼-钴-钨耐热合金厚板材、薄板材和带材用规范(镍基、Cr 21.7、Fe 18.5、Mo 9、Co 1.5、W 0.6)

This British Standard specifies requirements for nickel-chromium-ironmolybdenum- cobalt-tungsten heat-resisting alloy plate, sheet and strip

Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy plate, sheet and strip (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)

BS 2TA 42-2009 钛铝钼锡硅碳合金锻件规范(抗拉强度1205-1375 MPa)(限定等圆断面大于100 mm至150 mm并包括150 mm)

This British Standard specifies requirements for titanium-aluminiummolybdenum-tin-silicon-carbon alloy forgings with a tensile strength of 1 205 MPa

Specification for forgings of titanium-aluminium- molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to and including 75 mm)

BS 2TA 46-2009 钛-铝-钼-锡-硅合金棒材和型材规范(抗拉强度 1050-1220MPa)(限定等圆断面大于25 mm至100 mm并包括100 mm)

This standard specifies requirements for titanium-aluminiummolybdenum-tin-silicon alloy bar and section with a tensile strength of 1 050 MPa to 1 220

Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 MPa) (limiting ruling section over 25 mm up to and including 100 mm)

BS 2TA 45-2009 钛-铝-钼-锡-硅合金生产的棒材和型材规范(抗拉强度1100-1280 MPa)(限定等圆切面25 mm)

This standard specifies requirements for titanium-aluminiummolybdenum-tin-silicon alloy bar and section with a tensile strength of 1 100 MPa to 1 280

Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1100-1280 MPa) (limiting ruling section 25 mm)

BS 2TA 57-2009 钛-铝-钼-锡-硅合金板材规范(抗拉强度1030-1220 MPa)(厚度大于50 mm至并包括65 mm)

This standard specifies requirements for titanium-aluminiummolybdenum-tin-silicon alloy plate of a thickness over 50 mm up to and including 65 mm

Specification for plate of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1030-1220 MPa) (thickness over 50 mm up to and including 65 mm)

BS 2HR 207-2009 镍-铁-铬-钼-铝-钛热阻合金板材、薄板材和带材规范(镍/钴 43.5、铬 16.5、钼 3.3、铝 1.2、钛 1.2、其余部分为铁)

This British Standard specifies requirements for nickel-iron-chromiummolybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip

Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder)

BS 2HR 55-2010 镍-铁-铬-钼-铝-钛抗热合金坯料,棒材,锻件和零部件(Ni/Co 43.5, Cr 16.5, Mo 3. 3, Al 1.2, Ti 1.2, Fe残余物)规范

This British Standard specifies requirements for nickel-iron-chromiummolybdenum-aluminium-titanium heat-resisting alloy supplied in the following

Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (Ni/Co 43.5, Cr 16.5, Mo 3. 3, Al 1.2, Ti 1.2, Fe remainder)

BS 2HR 3-2010 镍-钴-铬-钼-铝-钛抗热合金坯料,棒材,锻件和零部件(镍基,Co 20, Cr 14. 8, Mo 5, Al 4.8, Ti 1.2)规范

This British Standard specifies requirements for nickel-cobaltchromium-molybdenum-aluminium-titanium heat-resisting alloy supplied in the following

Specification for nickel-cobalt-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 14. 8, Mo 5, Al 4.8, Ti 1.2)

BS 2HR 6-2010 镍-铬-铁-钼-钴-钨抗热合金坯料,棒材,锻件和零部件(镍基,Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)规范

This British Standard specifies requirements for nickel‑chromiumiron‑molybdenum‑cobalt-tungsten heat‑resisting alloy supplied in the following forms

Specification for nickel-chromium- iron-molybdenum-cobalt-tungsten heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)

BS 2TA 50-2009 钛-铝-钼-锡-硅合金锻坯规范(抗拉强度1000-1200 MPa)(限定等圆断面大于100 mm至150 mm并包括150 mm)

This standard specifies requirements for titanium-aluminiummolybdenum-tin-silicon alloy forging stock with a tensile strength of 1 000 to 1 200 MPa

Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 MPa) (limiting ruling section over 100 mm up to and including 150 mm)

BS 2HR 206-2009 镍-钴-铬-钼-钛-铝热阻的合金板材、片材和带材规范（镍基合金，钴 20、钼 5.9、钛 2.1、铝 0.5）

This British Standard specifies requirements for nickel-cobaltchromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip

Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)

BS 2TA 41-2009 钛-铝-钼-锡-硅-碳合金锻坯规范(抗拉强度1205-1375 MPa)(限定等圆断面大于25mm至75mm并包括75mm)

This British Standard specifies requirements for titanium-aluminiummolybdenum-tin-silicon-carbon alloy forging stock with a tensile strength of 1 205

Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to and including 75 mm)

BS 2TA 49-2009 钛-铝-钼-锡-硅-碳合金生产的板材和型材规范(抗拉强度1000-1200 MPa)(限定等圆断面大于100 mm至150 mm并包括150 mm)

This standard specifies requirements for titanium-aluminiummolybdenum-tin-silicon alloy bar and section with a tensile strength of 1 000 MPa to 1 200

Specification for bar and section for machining of titanium-aluminium- molybdenum-tin-silicon-carbon alloy (Tensile strength 1000-1200 MPa) (Limiting ruling section over 100 mm up to and including 150 mm)

BS 2TA 39-2009 钛铝钼锡硅碳合金锻坯规范(抗拉强度1250-1420MPa)(限定等圆断面25mm)

This British Standard specifies requirements for titanium-aluminiummolybdenum-tin-silicon-carbon alloy forging stock with a tensile strength of 1 250

Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1250-1420 MPa) (limiting ruling section 25 mm)

BS 2TA 47-2009 钛-铝-钼-锡-硅合金锻坯规范(抗拉强度1050-1220 MPa)(限定等圆断面100 mm)

This standard specifies requirements for titanium-aluminiummolybdenum-tin-silicon alloy forging stock with a tensile strength of 1 050 MPa to 1 220

Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 MPa) (limiting ruling section 100 mm)

BS 2HR 204-2009 镍-铬-铁-钼-钴-钨耐热合金厚板材、薄板材和带材用规范(镍基、Cr 21.7、Fe 18.5、Mo 9、Co 1.5、W 0.6)

This British Standard specifies requirements for nickel-chromium-ironmolybdenum- cobalt-tungsten heat-resisting alloy plate, sheet and strip

Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy plate, sheet and strip (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)

BS 2TA 42-2009 钛铝钼锡硅碳合金锻件规范(抗拉强度1205-1375 MPa)(限定等圆断面大于100 mm至150 mm并包括150 mm)

This British Standard specifies requirements for titanium-aluminiummolybdenum-tin-silicon-carbon alloy forgings with a tensile strength of 1 205 MPa

Specification for forgings of titanium-aluminium- molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to and including 75 mm)

BS 2TA 46-2009 钛-铝-钼-锡-硅合金棒材和型材规范(抗拉强度 1050-1220MPa)(限定等圆断面大于25 mm至100 mm并包括100 mm)

This standard specifies requirements for titanium-aluminiummolybdenum-tin-silicon alloy bar and section with a tensile strength of 1 050 MPa to 1 220

Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 MPa) (limiting ruling section over 25 mm up to and including 100 mm)

BS 2TA 45-2009 钛-铝-钼-锡-硅合金生产的棒材和型材规范(抗拉强度1100-1280 MPa)(限定等圆切面25 mm)

This standard specifies requirements for titanium-aluminiummolybdenum-tin-silicon alloy bar and section with a tensile strength of 1 100 MPa to 1 280

Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1100-1280 MPa) (limiting ruling section 25 mm)

BS 2TA 57-2009 钛-铝-钼-锡-硅合金板材规范(抗拉强度1030-1220 MPa)(厚度大于50 mm至并包括65 mm)

This standard specifies requirements for titanium-aluminiummolybdenum-tin-silicon alloy plate of a thickness over 50 mm up to and including 65 mm

Specification for plate of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1030-1220 MPa) (thickness over 50 mm up to and including 65 mm)

BS 2HR 207-2009 镍-铁-铬-钼-铝-钛热阻合金板材、薄板材和带材规范(镍/钴 43.5、铬 16.5、钼 3.3、铝 1.2、钛 1.2、其余部分为铁)

This British Standard specifies requirements for nickel-iron-chromiummolybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip

Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder)

BS 2HR 55-2010 镍-铁-铬-钼-铝-钛抗热合金坯料,棒材,锻件和零部件(Ni/Co 43.5, Cr 16.5, Mo 3. 3, Al 1.2, Ti 1.2, Fe残余物)规范

This British Standard specifies requirements for nickel-iron-chromiummolybdenum-aluminium-titanium heat-resisting alloy supplied in the following

Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (Ni/Co 43.5, Cr 16.5, Mo 3. 3, Al 1.2, Ti 1.2, Fe remainder)

BS 2HR 3-2010 镍-钴-铬-钼-铝-钛抗热合金坯料,棒材,锻件和零部件(镍基,Co 20, Cr 14. 8, Mo 5, Al 4.8, Ti 1.2)规范

This British Standard specifies requirements for nickel-cobaltchromium-molybdenum-aluminium-titanium heat-resisting alloy supplied in the following

Specification for nickel-cobalt-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 14. 8, Mo 5, Al 4.8, Ti 1.2)

BS 2HR 6-2010 镍-铬-铁-钼-钴-钨抗热合金坯料,棒材,锻件和零部件(镍基,Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)规范

This British Standard specifies requirements for nickel‑chromiumiron‑molybdenum‑cobalt-tungsten heat‑resisting alloy supplied in the following forms

Specification for nickel-chromium- iron-molybdenum-cobalt-tungsten heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)