钴检测

NF C93-919-3-2-2009 光纤传连接器光纤接口.第3-2部分:8度PC角单模光纤用2.5mm和1.25mm直径圆柱形完全氧化钴套管接口

Fibre optic connector optical interfaces - Part 3-2 : optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres.

NF C93-919-3-1-2009 光纤连接器光纤接口.第3-1部分:单模光纤用2.5mm和1.25mm直径圆柱形完全氧化钴PC套管光纤接口

Fibre optic connector optical interfaces - Part 3-1 : optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre.

BS 2HR 206-2009 镍-钴-铬-钼-钛-铝热阻的合金板材、片材和带材规范（镍基合金，钴 20、钼 5.9、钛 2.1、铝 0.5）

This British Standard specifies requirements for nickel-cobaltchromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip

Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)

BS 2HR 204-2009 镍-铬-铁-钼-钴-钨耐热合金厚板材、薄板材和带材用规范(镍基、Cr 21.7、Fe 18.5、Mo 9、Co 1.5、W 0.6)

This British Standard specifies requirements for nickel-chromium-ironmolybdenum- cobalt-tungsten heat-resisting alloy plate, sheet and strip

Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy plate, sheet and strip (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)

BS 3HR 202-2009 镍-铬-钴-钛-铝的热阻合金薄板材和带材规范（镍基合金，铬 19.5、钴 18.0、钛 2.5、铝 1.5）

This British Standard specifies requirements for nickel-chromiumcobalt-titanium-aluminium heat-resisting alloy sheet and strip

Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy sheet and strip (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)

BS 2HR 207-2009 镍-铁-铬-钼-铝-钛热阻合金板材、薄板材和带材规范(镍/钴 43.5、铬 16.5、钼 3.3、铝 1.2、钛 1.2、其余部分为铁)

This British Standard specifies requirements for nickel-iron-chromiummolybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip

Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder)

HG/T 4115-2009 固体环烷酸钴

本标准规定了固体环烷酸钴的要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于以亚钴化合物和以环烷酸为主的羧酸经皂化反应后经蒸馏而制得的固体环烷酸钴

Solid cobalt naphthenate

XB/T 507-2009 2:17型钐钴永磁材料

本标准规定了2:17型钐钴永磁材料的要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于粉末冶金工艺生产的2:17型钐钴永磁材料,供电子、电力、机械行业制作永磁器件等用

2:17 Sm Co Permanent magnetic material

BS 2HR 3-2010 镍-钴-铬-钼-铝-钛抗热合金坯料,棒材,锻件和零部件(镍基,Co 20, Cr 14. 8, Mo 5, Al 4.8, Ti 1.2)规范

This British Standard specifies requirements for nickel-cobaltchromium-molybdenum-aluminium-titanium heat-resisting alloy supplied in the following

Specification for nickel-cobalt-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 14. 8, Mo 5, Al 4.8, Ti 1.2)

BS 2HR 6-2010 镍-铬-铁-钼-钴-钨抗热合金坯料,棒材,锻件和零部件(镍基,Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)规范

This British Standard specifies requirements for nickel‑chromiumiron‑molybdenum‑cobalt-tungsten heat‑resisting alloy supplied in the following forms

Specification for nickel-chromium- iron-molybdenum-cobalt-tungsten heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)

BS 2HR 10-2010 镍-钴-铬-钼-钛-铝抗热合金坯料,棒材,锻件和零部件(镍基,Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)规范

This British Standard specifies requirements for nickel-cobaltchromium- molybdenum-titanium-aluminium heat‑resisting alloy supplied in the following

Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)

BS 2HR 4-2010 镍铬钴铝钼钛耐热合金坯、棒、铸件和部件用规范(镍基,Cr 15,Co 14. 2,Al 5,Mo 4,Ti 4)

This British Standard specifies requirements for nickel-chromiumcobalt-aluminium-molybdenum-titanium heat‑resisting alloy supplied in the following

Specification for nickel-chromium-cobalt-aluminium-molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 15, Co 14. 2, Al 5, Mo 4, Ti 4)

BS 2HR 40-2010 钴-铬-钨-镍-锰耐热合金胚锭、棒材和锻件用规范(钴基Cr 20, W 15, Ni 10, Mn 1.5)

This British Standard specifies requirements for cobalt-chromiumtungsten-nickel-manganese heat‑resisting alloy supplied in the following forms

Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy billets, bars and forgings (cobalt base Cr 20, W 15, Ni 10, Mn 1.5)

NF A06-577-2010 铝及铝合金的化学分析.分光光度法测定钴.

Chemical analysis of aluminium and aluminium alloys - Spectrophotometric determination of cobalt.

GB/T 14352.7-2010 钨矿石、钼矿石化学分析方法 第7部分：钴量测定

警告：使用本部分的人员应有正规实验室工作的实践经验。本部分并未指出所有可能的安全问题。使用者有责任采取适当的安全和健康措施，并保证符合国家有关法规规定的条件。 GB/T 14352的本部分规定了钨矿石、钼矿石中钴量的测定方法。 本部分适用于钨矿石、钼矿石中钴量的测定。 测定范围：极谱法5μg

Methods for chemical analysis of tungsten ores and molybdenum ores.Part 7:Determination of cobalt content

NF C93-919-3-2-2009 光纤传连接器光纤接口.第3-2部分:8度PC角单模光纤用2.5mm和1.25mm直径圆柱形完全氧化钴套管接口

Fibre optic connector optical interfaces - Part 3-2 : optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres.

NF C93-919-3-1-2009 光纤连接器光纤接口.第3-1部分:单模光纤用2.5mm和1.25mm直径圆柱形完全氧化钴PC套管光纤接口

Fibre optic connector optical interfaces - Part 3-1 : optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre.

BS 2HR 206-2009 镍-钴-铬-钼-钛-铝热阻的合金板材、片材和带材规范（镍基合金，钴 20、钼 5.9、钛 2.1、铝 0.5）

This British Standard specifies requirements for nickel-cobaltchromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip

Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)

BS 2HR 204-2009 镍-铬-铁-钼-钴-钨耐热合金厚板材、薄板材和带材用规范(镍基、Cr 21.7、Fe 18.5、Mo 9、Co 1.5、W 0.6)

This British Standard specifies requirements for nickel-chromium-ironmolybdenum- cobalt-tungsten heat-resisting alloy plate, sheet and strip

Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy plate, sheet and strip (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)

BS 3HR 202-2009 镍-铬-钴-钛-铝的热阻合金薄板材和带材规范（镍基合金，铬 19.5、钴 18.0、钛 2.5、铝 1.5）

This British Standard specifies requirements for nickel-chromiumcobalt-titanium-aluminium heat-resisting alloy sheet and strip

Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy sheet and strip (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)

BS 2HR 207-2009 镍-铁-铬-钼-铝-钛热阻合金板材、薄板材和带材规范(镍/钴 43.5、铬 16.5、钼 3.3、铝 1.2、钛 1.2、其余部分为铁)

This British Standard specifies requirements for nickel-iron-chromiummolybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip

Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder)

HG/T 4115-2009 固体环烷酸钴

本标准规定了固体环烷酸钴的要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于以亚钴化合物和以环烷酸为主的羧酸经皂化反应后经蒸馏而制得的固体环烷酸钴

Solid cobalt naphthenate

XB/T 507-2009 2:17型钐钴永磁材料

本标准规定了2:17型钐钴永磁材料的要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于粉末冶金工艺生产的2:17型钐钴永磁材料,供电子、电力、机械行业制作永磁器件等用

2:17 Sm Co Permanent magnetic material

BS 2HR 3-2010 镍-钴-铬-钼-铝-钛抗热合金坯料,棒材,锻件和零部件(镍基,Co 20, Cr 14. 8, Mo 5, Al 4.8, Ti 1.2)规范

This British Standard specifies requirements for nickel-cobaltchromium-molybdenum-aluminium-titanium heat-resisting alloy supplied in the following

Specification for nickel-cobalt-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 14. 8, Mo 5, Al 4.8, Ti 1.2)

BS 2HR 6-2010 镍-铬-铁-钼-钴-钨抗热合金坯料,棒材,锻件和零部件(镍基,Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)规范

This British Standard specifies requirements for nickel‑chromiumiron‑molybdenum‑cobalt-tungsten heat‑resisting alloy supplied in the following forms

Specification for nickel-chromium- iron-molybdenum-cobalt-tungsten heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)

BS 2HR 10-2010 镍-钴-铬-钼-钛-铝抗热合金坯料,棒材,锻件和零部件(镍基,Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)规范

This British Standard specifies requirements for nickel-cobaltchromium- molybdenum-titanium-aluminium heat‑resisting alloy supplied in the following

Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)

BS 2HR 4-2010 镍铬钴铝钼钛耐热合金坯、棒、铸件和部件用规范(镍基,Cr 15,Co 14. 2,Al 5,Mo 4,Ti 4)

This British Standard specifies requirements for nickel-chromiumcobalt-aluminium-molybdenum-titanium heat‑resisting alloy supplied in the following

Specification for nickel-chromium-cobalt-aluminium-molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 15, Co 14. 2, Al 5, Mo 4, Ti 4)

BS 2HR 40-2010 钴-铬-钨-镍-锰耐热合金胚锭、棒材和锻件用规范(钴基Cr 20, W 15, Ni 10, Mn 1.5)

This British Standard specifies requirements for cobalt-chromiumtungsten-nickel-manganese heat‑resisting alloy supplied in the following forms

Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy billets, bars and forgings (cobalt base Cr 20, W 15, Ni 10, Mn 1.5)

NF A06-577-2010 铝及铝合金的化学分析.分光光度法测定钴.

Chemical analysis of aluminium and aluminium alloys - Spectrophotometric determination of cobalt.

GB/T 14352.7-2010 钨矿石、钼矿石化学分析方法 第7部分：钴量测定

警告：使用本部分的人员应有正规实验室工作的实践经验。本部分并未指出所有可能的安全问题。使用者有责任采取适当的安全和健康措施，并保证符合国家有关法规规定的条件。 GB/T 14352的本部分规定了钨矿石、钼矿石中钴量的测定方法。 本部分适用于钨矿石、钼矿石中钴量的测定。 测定范围：极谱法5μg

Methods for chemical analysis of tungsten ores and molybdenum ores.Part 7:Determination of cobalt content