铍检测

BS 3B 29-2009 铜铍合金带材和箔材规范(固溶处理、冷轧:增硬以及沉淀处理)

This British Standard specifies requirements for copper-beryllium alloy supplied in the form of strip and foil

Specification for copper-beryllium alloy strip and foil (solution treated, cold rolled: quarter hard and precipitation treated)

BS 3B 33-2009 铜铍合金丝的规范(固溶处理和沉淀硬化)

This British Standard specifies requirements for copper-beryllium alloy supplied in the form of wire

Specification for copper-beryllium alloy wire(solution treated and precipitation treated)

BS 3B 28-2009 铜-铍合金带材和箔材规范(溶液处理和沉淀处理)

This British Standard specifies requirements for copper-beryllium alloy supplied in the form of strip and foil

Specification for copper-beryllium alloy strip and foil (solution treated and precipitation treated)

BS 3B 31-2009 铜-铍合金带材和箔材规范(溶液处理、冷轧:完全硬化和沉淀处理)

This British Standard specifies requirements for copper-beryllium alloy supplied in the form of strip and foil

Specification for copper-beryllium alloy strip and foil (solution treated, cold rolled: full hard and precipitation treated)

BS 3B 30-2009 铜-铍合金带材和箔材规范(冷轧溶液处理:半硬化和沉淀处理)

This British Standard specifies requirements for copper-beryllium alloy supplied in the form of strip and foil

Specification for copper-beryllium alloy strip and foil (solution treated, cold rolled: half hard and precipitation treated)

BS 3B 32-2009 铜-铍合金条材、棒材和型材规范(溶液处理和时效硬化)

This British Standard specifies requirements for copper-beryllium alloy supplied in the form of rods, bars and sections

Specification for copper-beryllium alloy rods, bars and sections (solution treated and precipitation treated)

YS/T 334-2009 铍青铜圆形棒材

本标准规定了铍青铜圆形棒的要求、试验方法、检验规则、标志、包装、运输、贮存和订货单(或合同)的内容。 本标准适用于航天、航空、电子、石油行业等部门使用的铍青铜圆形棒材

Copper-beryllium alloy rod

GB/T 17414.1-2010 铍矿石化学分析方法 第1部分：铍量测定 埃利罗菁R光度法

警示：使用本标准的人员应有正规实验室工作的实践经验。本标准并未指出所有可能的安全问题。使用者有责任采取适当的安全和健康措施，并保证符合国家有关法规规定的条件。 GB/T 17414的本部分规定了埃利罗菁R光度法测定铍矿石中铍量的方法。 本部分适用于铍矿石，也适用于锂、铷、铯矿石和钽、铌矿石中低

Method for chemical analysis of beryllium ores.Part 1:Determination of beryllium content.Eriochrome cyanine R photometric method

GB/T 17414.2-2010 铍矿石化学分析方法 第2部分：铍量测定 催化极谱法

警示：使用本标准的人员应有正规实验室工作的实践经验。本标准并未指出所有可能的安全问题。使用者有责任采取适当的安全和健康措施，并保证符合国家有关法规规定的条件。 GB/T 17414的本部分规定了用催化极谱法测定铍矿石中铍量的方法。 本部分适用于铍矿石，也适用于锂、铷、铯矿石和钽、铌矿石中低含量铍

Method for chemical analysis of beryllium ores.Part 2:Determination of beryllium content.Catalytic polarographic method

GB/T 26056-2010 真空热压铍材

本标准规定了真空热压铍材的要求、试验方法、检验规则、标志、包装、运输、贮存及质量证明书与订货单(或合同)内容。 本标准适用于真空热压成型制造的铍材产品

Vacuum hot press beryllium material

GB/T 26063-2010 铍铝合金

本标准规定了铍铝合金的要求、试验方法、检验规则、标志、包装、运输、贮存、质量证明书及合同（或订货单）内容等。 本标准适用于由粉末冶金工艺或由真空熔铸工艺生产的铍含量在60%～69%的铍铝合金产品

Beryllium aluminum alloy

GB/T 26313-2010 铍青铜缝管

本标准规定了铍青铜缝管的要求、试验方法、检验规则、标志、包装、运输、贮存、质量证明书和合同（或订货单）内容。 本标准适用于石油、煤炭、电子、仪表以及其他行业应用的铍青铜缝圆管

Copper-beryllium alloy seamless tubes

SAE AMS 7911C-2010 经过热等静压压和热处理的预成型38Al62Be铝铍

This specification covers aluminum and beryllium powders consolidated by hot isostatic pressing (HIP) into the form of bar, rod, tubing, and shapes

Aluminum Beryllium, Preforms Hot Isostatic Pressed and Heat Treated 38Al 62Be

SAE AMS 7907C-2010 铍栏杆的棒型管状仪表级

This specification covers a beryllium in the form of bars, rods, tubing, and machined shapes from vacuum hot pressed powder. These products have been

Beryllium Bars, Rods, Tubing, and Shapes Instrument Grade

SAE AMS 2728B-2010 变形铍铜合金零件的热处理

This specification establishes the requirements for heat treatment of wrought copper beryllium parts by users or by their vendors or subcontractors

Heat Treatment of Wrought Copper Beryllium Alloy Parts

BS 3B 29-2009 铜铍合金带材和箔材规范(固溶处理、冷轧:增硬以及沉淀处理)

This British Standard specifies requirements for copper-beryllium alloy supplied in the form of strip and foil

Specification for copper-beryllium alloy strip and foil (solution treated, cold rolled: quarter hard and precipitation treated)

BS 3B 33-2009 铜铍合金丝的规范(固溶处理和沉淀硬化)

This British Standard specifies requirements for copper-beryllium alloy supplied in the form of wire

Specification for copper-beryllium alloy wire(solution treated and precipitation treated)

BS 3B 28-2009 铜-铍合金带材和箔材规范(溶液处理和沉淀处理)

This British Standard specifies requirements for copper-beryllium alloy supplied in the form of strip and foil

Specification for copper-beryllium alloy strip and foil (solution treated and precipitation treated)

BS 3B 31-2009 铜-铍合金带材和箔材规范(溶液处理、冷轧:完全硬化和沉淀处理)

This British Standard specifies requirements for copper-beryllium alloy supplied in the form of strip and foil

Specification for copper-beryllium alloy strip and foil (solution treated, cold rolled: full hard and precipitation treated)

BS 3B 30-2009 铜-铍合金带材和箔材规范(冷轧溶液处理:半硬化和沉淀处理)

This British Standard specifies requirements for copper-beryllium alloy supplied in the form of strip and foil

Specification for copper-beryllium alloy strip and foil (solution treated, cold rolled: half hard and precipitation treated)

BS 3B 32-2009 铜-铍合金条材、棒材和型材规范(溶液处理和时效硬化)

This British Standard specifies requirements for copper-beryllium alloy supplied in the form of rods, bars and sections

Specification for copper-beryllium alloy rods, bars and sections (solution treated and precipitation treated)

YS/T 334-2009 铍青铜圆形棒材

本标准规定了铍青铜圆形棒的要求、试验方法、检验规则、标志、包装、运输、贮存和订货单(或合同)的内容。 本标准适用于航天、航空、电子、石油行业等部门使用的铍青铜圆形棒材

Copper-beryllium alloy rod

GB/T 17414.1-2010 铍矿石化学分析方法 第1部分：铍量测定 埃利罗菁R光度法

警示：使用本标准的人员应有正规实验室工作的实践经验。本标准并未指出所有可能的安全问题。使用者有责任采取适当的安全和健康措施，并保证符合国家有关法规规定的条件。 GB/T 17414的本部分规定了埃利罗菁R光度法测定铍矿石中铍量的方法。 本部分适用于铍矿石，也适用于锂、铷、铯矿石和钽、铌矿石中低

Method for chemical analysis of beryllium ores.Part 1:Determination of beryllium content.Eriochrome cyanine R photometric method

GB/T 17414.2-2010 铍矿石化学分析方法 第2部分：铍量测定 催化极谱法

警示：使用本标准的人员应有正规实验室工作的实践经验。本标准并未指出所有可能的安全问题。使用者有责任采取适当的安全和健康措施，并保证符合国家有关法规规定的条件。 GB/T 17414的本部分规定了用催化极谱法测定铍矿石中铍量的方法。 本部分适用于铍矿石，也适用于锂、铷、铯矿石和钽、铌矿石中低含量铍

Method for chemical analysis of beryllium ores.Part 2:Determination of beryllium content.Catalytic polarographic method

GB/T 26056-2010 真空热压铍材

本标准规定了真空热压铍材的要求、试验方法、检验规则、标志、包装、运输、贮存及质量证明书与订货单(或合同)内容。 本标准适用于真空热压成型制造的铍材产品

Vacuum hot press beryllium material

GB/T 26063-2010 铍铝合金

本标准规定了铍铝合金的要求、试验方法、检验规则、标志、包装、运输、贮存、质量证明书及合同（或订货单）内容等。 本标准适用于由粉末冶金工艺或由真空熔铸工艺生产的铍含量在60%～69%的铍铝合金产品

Beryllium aluminum alloy

GB/T 26313-2010 铍青铜缝管

本标准规定了铍青铜缝管的要求、试验方法、检验规则、标志、包装、运输、贮存、质量证明书和合同（或订货单）内容。 本标准适用于石油、煤炭、电子、仪表以及其他行业应用的铍青铜缝圆管

Copper-beryllium alloy seamless tubes

SAE AMS 7911C-2010 经过热等静压压和热处理的预成型38Al62Be铝铍

This specification covers aluminum and beryllium powders consolidated by hot isostatic pressing (HIP) into the form of bar, rod, tubing, and shapes

Aluminum Beryllium, Preforms Hot Isostatic Pressed and Heat Treated 38Al 62Be

SAE AMS 7907C-2010 铍栏杆的棒型管状仪表级

This specification covers a beryllium in the form of bars, rods, tubing, and machined shapes from vacuum hot pressed powder. These products have been

Beryllium Bars, Rods, Tubing, and Shapes Instrument Grade

SAE AMS 2728B-2010 变形铍铜合金零件的热处理

This specification establishes the requirements for heat treatment of wrought copper beryllium parts by users or by their vendors or subcontractors

Heat Treatment of Wrought Copper Beryllium Alloy Parts