BS 2TA 56-2009 钛-铝-钒合金薄板规范(抗拉强度895-1150 MPa)(抗拉强度895-1150 MPa)(最大厚度100 mm)
This standard specifies requirements for titanium-aluminiumvanadium alloy plate with a tensile strength of 895 to 1 150 MPa
Specification for plate of titanium-aluminium-vanadium alloy (tensile strength 895-1150 MPa) (maximum thickness 100 mm)
BS 2TA 58-2009 钛铜的合金板材规范(抗拉强度520-640MPa)(最大厚度10 mm)
This standard specifies requirements for titanium-copper alloy plate with a tensile strength of 520 to 640 MPa
Specification for plate of titanium-copper alloy (tensile strength 520-640 MPa) (maximum thickness 10 mm)
BS 2TA 57-2009 钛-铝-钼-锡-硅合金板材规范(抗拉强度1030-1220 MPa)(厚度大于50 mm至并包括65 mm)
This standard specifies requirements for titanium-aluminiummolybdenum-tin-silicon alloy plate of a thickness over 50 mm up to and including 65 mm
Specification for plate of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1030-1220 MPa) (thickness over 50 mm up to and including 65 mm)
DIN 55543-1-2010 包装试验.包装膜试验方法.第1部分:膜厚度的测定
This standard specifies the determination of the thickness of flexible, plane films and composite films as well as of flexible laminates for packaging
Packaging test - Test methods for packaging films - Part 1: Determination of the film thickness
NF T37-001-1-2010 卷材覆层金属.试验方法.第1部分:涂膜厚度
Coil coated metals - Test methods - Part 1 : film thickness.
NF P84-128-2-2010 防水挠性薄板.厚度和单位面积质量的测定.第2部分:塑料和橡胶薄板
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2 : plastic and rubber sheets.
DIN EN 13523-1-2010 卷材镀层金属.试验方法.第1部分:膜厚度.德文版本EN 13523-1-2009
DIN EN 13523-1 specifies the procedures for determining the dry film thickness of an organic coating on a metallic substrate (coil coating). Four
Coil coated metals - Test methods - Part 1: Film thickness; German version EN 13523-1:2009
DIN EN 1849-2-2010 防水软板.厚度和单位面积质量测定.第2部分:塑料和橡胶板.德文版本EN 1849-2-2009
This European Standard specifies methods for the determination of the thickness and mass per unit area of plastic and rubber sheets for roof
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets; German version EN 1849-2:2009
QB/T 1938-2010 松软纸厚度的测定
本标准规定了松软纸厚度的测定方法。 本标准适用于各种滤纸，而不适用于皱纹纸
Bulking paper.Determination of thickness
BS EN 1849-2-2009 防水柔性板.厚度和单位面积质量的测定.塑料和橡胶板
This European Standard specifies methods for the determination of the thickness and mass per unit area of plastic and rubber sheets for roof
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Plastic and rubber sheets
GB/T 25276-2010 液晶显示器（LCD）用三醋酸纤维素酯（TAC）膜 厚度测定方法
本标准规定了液晶显示器（LCD）用三醋酸纤维素酯（TAC）膜厚度的测定方法。 本标准适用于机械测量法和射线法对液晶显示器用TAC膜厚度的测定。也适用于眼镜片用TAC膜厚度的测定。不适用于TAC膜压花边厚度的测定
Triacetyl cellulose (TAC) films for liquid crystal display(LCD).Determination of thickness
GB/T 25188-2010 硅晶片表面超薄氧化硅层厚度的测量 X射线光电子能谱法
本标准规定了一种准确测量硅晶片表面超薄氧化硅层厚度的方法，即X射线光电子能谱法（XPS）。本标准适用于热氧化法在硅晶片表面制备的超薄氧化硅层厚度的准确测量；通常，本标准适用的氧化硅层厚度不大于6nm
Thickness measurements for ultrathin silicon oxide layers on silicon wafers X-ray photoelectron spectroscopy
NF T54-803-1-2010 塑料.埋地型游泳池用增塑聚氯乙烯薄膜(PVC-P).第1部分:大于等于0.75 mm标称厚度的同质薄膜
Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1 : homogenous membranes of nominal thickness equal to or greater than 0,75 mm.
NF T54-803-2-2010 塑料.游泳池铺地用增塑聚氯乙烯(PVC-P)薄膜.第2部分:标称厚度≥1.5 mm的增强薄膜
Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2 : reinforced membranes of nominal thickness equal to or greater than 1,5 mm.
GOST R EN 12431-2008 建筑用浮隔地板的保温产品.厚度测量方法
Thermal insulating products used in building for floating floors. Method for measurement of thickness
BS 2TA 56-2009 钛-铝-钒合金薄板规范(抗拉强度895-1150 MPa)(抗拉强度895-1150 MPa)(最大厚度100 mm)
This standard specifies requirements for titanium-aluminiumvanadium alloy plate with a tensile strength of 895 to 1 150 MPa
Specification for plate of titanium-aluminium-vanadium alloy (tensile strength 895-1150 MPa) (maximum thickness 100 mm)
BS 2TA 58-2009 钛铜的合金板材规范(抗拉强度520-640MPa)(最大厚度10 mm)
This standard specifies requirements for titanium-copper alloy plate with a tensile strength of 520 to 640 MPa
Specification for plate of titanium-copper alloy (tensile strength 520-640 MPa) (maximum thickness 10 mm)
BS 2TA 57-2009 钛-铝-钼-锡-硅合金板材规范(抗拉强度1030-1220 MPa)(厚度大于50 mm至并包括65 mm)
This standard specifies requirements for titanium-aluminiummolybdenum-tin-silicon alloy plate of a thickness over 50 mm up to and including 65 mm
Specification for plate of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1030-1220 MPa) (thickness over 50 mm up to and including 65 mm)
DIN 55543-1-2010 包装试验.包装膜试验方法.第1部分:膜厚度的测定
This standard specifies the determination of the thickness of flexible, plane films and composite films as well as of flexible laminates for packaging
Packaging test - Test methods for packaging films - Part 1: Determination of the film thickness
NF T37-001-1-2010 卷材覆层金属.试验方法.第1部分:涂膜厚度
Coil coated metals - Test methods - Part 1 : film thickness.
NF P84-128-2-2010 防水挠性薄板.厚度和单位面积质量的测定.第2部分:塑料和橡胶薄板
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2 : plastic and rubber sheets.
DIN EN 13523-1-2010 卷材镀层金属.试验方法.第1部分:膜厚度.德文版本EN 13523-1-2009
DIN EN 13523-1 specifies the procedures for determining the dry film thickness of an organic coating on a metallic substrate (coil coating). Four
Coil coated metals - Test methods - Part 1: Film thickness; German version EN 13523-1:2009
DIN EN 1849-2-2010 防水软板.厚度和单位面积质量测定.第2部分:塑料和橡胶板.德文版本EN 1849-2-2009
This European Standard specifies methods for the determination of the thickness and mass per unit area of plastic and rubber sheets for roof
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets; German version EN 1849-2:2009
QB/T 1938-2010 松软纸厚度的测定
本标准规定了松软纸厚度的测定方法。 本标准适用于各种滤纸，而不适用于皱纹纸
Bulking paper.Determination of thickness
BS EN 1849-2-2009 防水柔性板.厚度和单位面积质量的测定.塑料和橡胶板
This European Standard specifies methods for the determination of the thickness and mass per unit area of plastic and rubber sheets for roof
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Plastic and rubber sheets
GB/T 25276-2010 液晶显示器（LCD）用三醋酸纤维素酯（TAC）膜 厚度测定方法
本标准规定了液晶显示器（LCD）用三醋酸纤维素酯（TAC）膜厚度的测定方法。 本标准适用于机械测量法和射线法对液晶显示器用TAC膜厚度的测定。也适用于眼镜片用TAC膜厚度的测定。不适用于TAC膜压花边厚度的测定
Triacetyl cellulose (TAC) films for liquid crystal display(LCD).Determination of thickness
GB/T 25188-2010 硅晶片表面超薄氧化硅层厚度的测量 X射线光电子能谱法
本标准规定了一种准确测量硅晶片表面超薄氧化硅层厚度的方法，即X射线光电子能谱法（XPS）。本标准适用于热氧化法在硅晶片表面制备的超薄氧化硅层厚度的准确测量；通常，本标准适用的氧化硅层厚度不大于6nm
Thickness measurements for ultrathin silicon oxide layers on silicon wafers X-ray photoelectron spectroscopy
NF T54-803-1-2010 塑料.埋地型游泳池用增塑聚氯乙烯薄膜(PVC-P).第1部分:大于等于0.75 mm标称厚度的同质薄膜
Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1 : homogenous membranes of nominal thickness equal to or greater than 0,75 mm.
NF T54-803-2-2010 塑料.游泳池铺地用增塑聚氯乙烯(PVC-P)薄膜.第2部分:标称厚度≥1.5 mm的增强薄膜
Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2 : reinforced membranes of nominal thickness equal to or greater than 1,5 mm.
GOST R EN 12431-2008 建筑用浮隔地板的保温产品.厚度测量方法
Thermal insulating products used in building for floating floors. Method for measurement of thickness
编辑：北检院编辑部
