不锈钢螺栓、螺钉和螺柱检测

GB/T 3098.6-2000 紧固件机械性能 不锈钢螺栓、螺钉和螺柱

本标准规定了由奥氏体、马氏体、和铁素体耐腐蚀不锈钢制造的、在环境温度为15～25℃条件下进行试验时，螺栓、螺钉和螺柱机械性能。在较高或较低温度下，其性能可能不同。 本标准适用的螺栓、螺钉和螺柱： 螺纹公称直径d<=39mm； 符合GB/T

Mechanical properties of fasteners-Bolts,screws and studs made of stainless-steel

GB/T 3098.6-2014 紧固件机械性能 不锈钢螺栓、螺钉和螺柱

GB/T 3098的本部分规定了由奥氏体、马氏体、铁素体耐腐蚀不锈钢制造的、在环境温度为10 ℃~35 ℃条件下测试时,螺栓、螺钉和螺柱的机械性能。在较高或较低温度下,其性能可能不同。本部分适用的螺栓、螺钉和螺柱:--螺纹公称直径d≤39 mm;--直径和螺距符合GB/T 192、GB/T 193和

Mechanical properties of fasteners.Stainless steel Bolts,screws and studs

GB/T 41157.3-2022 核电厂用紧固件 第3部分：不锈钢螺栓、螺钉和螺柱

Fasteners for nuclear power plants—Part 3：Bolts, screws and studs made of corrosion-resistant stainless steel

GB 3098.6-1986 紧固件机械性能. 不锈钢螺栓、螺钉、螺柱和螺母

本标准适用于由奥氏体、马氏体和铁素体耐腐蚀不锈钢制造的、任何形状的、螺纹直径为1.6～39mm的螺栓、螺钉、螺柱和螺母。其螺纹尺寸及公差按GB 193-1981, GB 196-1981和GB 197-1981规定。此外，螺母的对边宽度不应小于1.45D和螺纹有效长度≥0.6D。本标准未规定在特殊

Mechanical properties of fasteners--Stainless steel bolts,screws,studs and nuts

ASTM F593-22 不锈钢螺栓、六角螺钉和螺柱标准规范

Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs

ASTM F593-02(2008 不锈钢螺栓、六角头螺钉和螺柱的标准规格

For the purposes of determining compliance with the specified limits for properties listed in this specification, an observed value or calculated

Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs

ASTM F593-13 不锈钢螺栓, 六角头螺钉和螺柱的标准规范

13.1x00a0;For the purposes of determining compliance with the specified limits

Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs

GB/T 3098.24-2020 紧固件机械性能 高温用不锈钢和镍合金螺栓、螺钉、螺柱和螺母

Mechanical properties of fasteners—Stainless steel and nickel alloys bolts, screws, studs and nuts for high temperature applications

NF E25-100-6:1998 耐蚀不锈钢紧固件机械特性.螺栓,螺钉和螺柱

Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 1 : bolts, screws and studs.

BS EN ISO 3506-1:2009 耐腐蚀不锈钢紧固件的机械特性.螺栓、螺钉和螺柱

This part of ISO 3506 specifies the mechanical properties of bolts, screws and studs made of austenitic, martensitic and ferritic steel grades

Mechanical properties of corrosion-resistant stainless steel fasteners - Bolts, screws and studs

BS EN ISO 3506-1:2020 耐腐蚀不锈钢紧固件的机械特性.螺栓、螺钉和螺柱

This part of ISO 3506 specifies the mechanical properties of bolts, screws and studs made of austenitic, martensitic and ferritic steel grades

Mechanical properties of corrosion-resistant stainless steel fasteners - Bolts, screws and studs

ASTM F2281-04 耐热及高温设备用不锈钢和镍合金螺栓、六角头螺钉和螺柱的标准规范

1.1 This specification covers the chemical and mechanical requirements for stainless steel and nickel alloy bolts, hex cap screws, and studs, 1/4

Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications

ASTM F2281-03 耐热及高温设备用不锈钢和镍合金螺栓、六角头螺钉和螺柱的标准规范

1.1 This specification covers the chemical and mechanical requirements for stainless steel and nickel alloy bolts, hex cap screws, and studs, 1/4

Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications

ASTM F2281-04(2012 耐热及高温设备用不锈钢和镍合金螺栓, 六角头螺钉和螺柱的标准规范

1.1 This specification covers the chemical and mechanical requirements for stainless steel and nickel alloy bolts, hex cap screws

Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications

SANS 1700-5-8-2003 紧固件．第5部分：一般要求和机械性能第8节：耐腐蚀不锈钢紧固件的机械特性．螺栓，螺钉和螺柱

Specifies the mechanical properties of bolts, screws and studs made of austenitic, martensitic and ferritic grades of corrosion-resistant stainless

Fasteners Part 5: General requirements and mechanical properties Section 8: Mechanical properties of corrosion-resistant stainless-steel fasteners - Bolts, screws and studs

GB/T 3098.6-2000 紧固件机械性能 不锈钢螺栓、螺钉和螺柱

本标准规定了由奥氏体、马氏体、和铁素体耐腐蚀不锈钢制造的、在环境温度为15～25℃条件下进行试验时，螺栓、螺钉和螺柱机械性能。在较高或较低温度下，其性能可能不同。 本标准适用的螺栓、螺钉和螺柱： 螺纹公称直径d<=39mm； 符合GB/T

Mechanical properties of fasteners-Bolts,screws and studs made of stainless-steel

GB/T 3098.6-2014 紧固件机械性能 不锈钢螺栓、螺钉和螺柱

GB/T 3098的本部分规定了由奥氏体、马氏体、铁素体耐腐蚀不锈钢制造的、在环境温度为10 ℃~35 ℃条件下测试时,螺栓、螺钉和螺柱的机械性能。在较高或较低温度下,其性能可能不同。本部分适用的螺栓、螺钉和螺柱:--螺纹公称直径d≤39 mm;--直径和螺距符合GB/T 192、GB/T 193和

Mechanical properties of fasteners.Stainless steel Bolts,screws and studs

GB/T 41157.3-2022 核电厂用紧固件 第3部分：不锈钢螺栓、螺钉和螺柱

Fasteners for nuclear power plants—Part 3：Bolts, screws and studs made of corrosion-resistant stainless steel

GB 3098.6-1986 紧固件机械性能. 不锈钢螺栓、螺钉、螺柱和螺母

本标准适用于由奥氏体、马氏体和铁素体耐腐蚀不锈钢制造的、任何形状的、螺纹直径为1.6～39mm的螺栓、螺钉、螺柱和螺母。其螺纹尺寸及公差按GB 193-1981, GB 196-1981和GB 197-1981规定。此外，螺母的对边宽度不应小于1.45D和螺纹有效长度≥0.6D。本标准未规定在特殊

Mechanical properties of fasteners--Stainless steel bolts,screws,studs and nuts

ASTM F593-22 不锈钢螺栓、六角螺钉和螺柱标准规范

Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs

ASTM F593-02(2008 不锈钢螺栓、六角头螺钉和螺柱的标准规格

For the purposes of determining compliance with the specified limits for properties listed in this specification, an observed value or calculated

Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs

ASTM F593-13 不锈钢螺栓, 六角头螺钉和螺柱的标准规范

13.1x00a0;For the purposes of determining compliance with the specified limits

Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs

GB/T 3098.24-2020 紧固件机械性能 高温用不锈钢和镍合金螺栓、螺钉、螺柱和螺母

Mechanical properties of fasteners—Stainless steel and nickel alloys bolts, screws, studs and nuts for high temperature applications

NF E25-100-6:1998 耐蚀不锈钢紧固件机械特性.螺栓,螺钉和螺柱

Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 1 : bolts, screws and studs.

BS EN ISO 3506-1:2009 耐腐蚀不锈钢紧固件的机械特性.螺栓、螺钉和螺柱

This part of ISO 3506 specifies the mechanical properties of bolts, screws and studs made of austenitic, martensitic and ferritic steel grades

Mechanical properties of corrosion-resistant stainless steel fasteners - Bolts, screws and studs

BS EN ISO 3506-1:2020 耐腐蚀不锈钢紧固件的机械特性.螺栓、螺钉和螺柱

This part of ISO 3506 specifies the mechanical properties of bolts, screws and studs made of austenitic, martensitic and ferritic steel grades

Mechanical properties of corrosion-resistant stainless steel fasteners - Bolts, screws and studs

ASTM F2281-04 耐热及高温设备用不锈钢和镍合金螺栓、六角头螺钉和螺柱的标准规范

1.1 This specification covers the chemical and mechanical requirements for stainless steel and nickel alloy bolts, hex cap screws, and studs, 1/4

Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications

ASTM F2281-03 耐热及高温设备用不锈钢和镍合金螺栓、六角头螺钉和螺柱的标准规范

1.1 This specification covers the chemical and mechanical requirements for stainless steel and nickel alloy bolts, hex cap screws, and studs, 1/4

Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications

ASTM F2281-04(2012 耐热及高温设备用不锈钢和镍合金螺栓, 六角头螺钉和螺柱的标准规范

1.1 This specification covers the chemical and mechanical requirements for stainless steel and nickel alloy bolts, hex cap screws

Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications

SANS 1700-5-8-2003 紧固件．第5部分：一般要求和机械性能第8节：耐腐蚀不锈钢紧固件的机械特性．螺栓，螺钉和螺柱

Specifies the mechanical properties of bolts, screws and studs made of austenitic, martensitic and ferritic grades of corrosion-resistant stainless

Fasteners Part 5: General requirements and mechanical properties Section 8: Mechanical properties of corrosion-resistant stainless-steel fasteners - Bolts, screws and studs