非磁性基体金属上非导电覆盖层检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

GB/T 4957-2003 厚度测量 涡流法

本标准规定了使用涡流测厚仪损测量非磁性基体金属上非导电覆盖层厚度的方法。 本方法适用于测量大多数阳极氧化膜的厚度;但它不适用于一切的转化膜,有些转化膜因为太薄而不能用这种方法测量(见第7章)。 本方法理论上能测量磁性基体金属上覆盖层的厚度,但不予推荐。在这种情况下,应采用GB/T

Non-conductive coatings on non-magnetic basis metals--Measurement of coating thickness-Eddy current

DS/EN ISO 2360:1995 厚度测量.涡流法

Denne standard specificerer en metode, hvorved der anven-des lagtykkelsesm?lere med hvirvelstr?msprincip til ikke-destruktiv m?ling af lagtykkelsen af

Non-conductive coatings on non-magnetic basis metals - Measurement of coating thickness - Eddy curent method

GB/T 31554-2015 厚度测量 相敏涡流法

本标准规定了使用相敏涡流测厚仪损测量金属和非金属基体上非磁性金属覆盖层厚度的方法,如: a)钢铁基体上镀锌、镉、铜、锡或铬; b)复合材料基体上镀铜或银。 与GB/T 4957幅敏涡流法相比,相敏涡流法对较小表面和较大曲率表面的镀层厚度测量误差,同时,受基体的磁性影响更小,但相敏涡流法受

Non-magnetic metallic coatings on metallic and non-metallic basismaterials.Measurement of coating thickness.Phase-sensitive eddy-current method

GB/T 4956-2003 厚度测量

本标准规定了使用磁性测厚仪损测量磁性基体金属上非磁性覆盖层(包括釉瓷和搪瓷层)厚度的方法。 本方法仅适用于在适当平整的试样上的测量。非磁性基体上的镍覆盖层厚度测量优先采用GB/T l3744规定的方法

Non-magnetic coatings on magnetic substrates--Measurement of coating thickness-Magnetic method

ISO 2360:1972 厚度的测量 涡流法

Title missing - Legacy paper document

ISO 2360:1982 厚度的测量 涡流法

Non-conductive coatings on non-magnetic basis metals; Measurement of coating thickness; Eddy current method

ISO 2178:1972 厚度的测量

Title missing - Legacy paper document

ISO 2178:2016 .厚度的测量.

Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method

ISO 2178:1982 厚度的测量

This second edition cancels and replaces the first edition (i. e. ISO 2178:1972). Specifies the method of using coating thickness instruments

Non-magnetic coatings on magnetic substrates; Measurement of coating thickness; Magnetic method

KS D ISO 2360:2002 .镀厚度的测量.振幅灵敏涡流法

이 규격은 진폭 민감형 와전류 장치를 이용하여 비자성 소지 재료 위의 비전도성 피막 두께의

Non-conductive coatings on non-magnetic basis metals-Measurement of coating thickness-Amplitude-sensitive eddy current method

ISO 2360:2003 .镀厚度的测量.振幅灵敏涡流法

This International Standard describes a method for non-destructive measurements of the thickness of non-conductive coatings on non-magnetic

Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method

DIN EN ISO 2360:2004 .镀厚度的测量.振幅灵敏涡流法

This standard specifies a method for non-destructive measurements of the thickness of non-conductive coatings on non-magnetic basis materials, using

Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method (ISO 2360:2003); German version EN ISO 2360:2003

BS EN ISO 2360:2017 .镀厚度的测量.振幅灵敏涡流法

Non-conductive coatings on non-magnetic electrically conductive base metals. Measurement of coating thickness. Amplitude-sensitive eddy-current method

ISO 2360:2017 .镀厚度的测量.振幅灵敏涡流法

This document specifies a method for non-destructive measurements of the thickness of non-conductive coatings on non-magnetic electrically conductive

Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method

SIS SS-ISO 2360:1983 .涂厚度测量.涡流法

This International Standard specifies the method of using eddy current instruments for non-destructive measurements of the thickness of non-conductive

Non-conductive coatings on non mag- netic basis metals - Measurement of coating thickness - Eddy current method

GB/T 4957-2003 厚度测量 涡流法

本标准规定了使用涡流测厚仪损测量非磁性基体金属上非导电覆盖层厚度的方法。 本方法适用于测量大多数阳极氧化膜的厚度;但它不适用于一切的转化膜,有些转化膜因为太薄而不能用这种方法测量(见第7章)。 本方法理论上能测量磁性基体金属上覆盖层的厚度,但不予推荐。在这种情况下,应采用GB/T

Non-conductive coatings on non-magnetic basis metals--Measurement of coating thickness-Eddy current

DS/EN ISO 2360:1995 厚度测量.涡流法

Denne standard specificerer en metode, hvorved der anven-des lagtykkelsesm?lere med hvirvelstr?msprincip til ikke-destruktiv m?ling af lagtykkelsen af

Non-conductive coatings on non-magnetic basis metals - Measurement of coating thickness - Eddy curent method

GB/T 31554-2015 厚度测量 相敏涡流法

本标准规定了使用相敏涡流测厚仪损测量金属和非金属基体上非磁性金属覆盖层厚度的方法,如: a)钢铁基体上镀锌、镉、铜、锡或铬; b)复合材料基体上镀铜或银。 与GB/T 4957幅敏涡流法相比,相敏涡流法对较小表面和较大曲率表面的镀层厚度测量误差,同时,受基体的磁性影响更小,但相敏涡流法受

Non-magnetic metallic coatings on metallic and non-metallic basismaterials.Measurement of coating thickness.Phase-sensitive eddy-current method

GB/T 4956-2003 厚度测量

本标准规定了使用磁性测厚仪损测量磁性基体金属上非磁性覆盖层(包括釉瓷和搪瓷层)厚度的方法。 本方法仅适用于在适当平整的试样上的测量。非磁性基体上的镍覆盖层厚度测量优先采用GB/T l3744规定的方法

Non-magnetic coatings on magnetic substrates--Measurement of coating thickness-Magnetic method

ISO 2360:1972 厚度的测量 涡流法

Title missing - Legacy paper document

ISO 2360:1982 厚度的测量 涡流法

Non-conductive coatings on non-magnetic basis metals; Measurement of coating thickness; Eddy current method

ISO 2178:1972 厚度的测量

Title missing - Legacy paper document

ISO 2178:2016 .厚度的测量.

Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method

ISO 2178:1982 厚度的测量

This second edition cancels and replaces the first edition (i. e. ISO 2178:1972). Specifies the method of using coating thickness instruments

Non-magnetic coatings on magnetic substrates; Measurement of coating thickness; Magnetic method

KS D ISO 2360:2002 .镀厚度的测量.振幅灵敏涡流法

이 규격은 진폭 민감형 와전류 장치를 이용하여 비자성 소지 재료 위의 비전도성 피막 두께의

Non-conductive coatings on non-magnetic basis metals-Measurement of coating thickness-Amplitude-sensitive eddy current method

ISO 2360:2003 .镀厚度的测量.振幅灵敏涡流法

This International Standard describes a method for non-destructive measurements of the thickness of non-conductive coatings on non-magnetic

Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method

DIN EN ISO 2360:2004 .镀厚度的测量.振幅灵敏涡流法

This standard specifies a method for non-destructive measurements of the thickness of non-conductive coatings on non-magnetic basis materials, using

Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method (ISO 2360:2003); German version EN ISO 2360:2003

BS EN ISO 2360:2017 .镀厚度的测量.振幅灵敏涡流法

Non-conductive coatings on non-magnetic electrically conductive base metals. Measurement of coating thickness. Amplitude-sensitive eddy-current method

ISO 2360:2017 .镀厚度的测量.振幅灵敏涡流法

This document specifies a method for non-destructive measurements of the thickness of non-conductive coatings on non-magnetic electrically conductive

Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method

SIS SS-ISO 2360:1983 .涂厚度测量.涡流法

This International Standard specifies the method of using eddy current instruments for non-destructive measurements of the thickness of non-conductive

Non-conductive coatings on non mag- netic basis metals - Measurement of coating thickness - Eddy current method

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。