连续热镀锌钢板和钢带检测

GB/T 2518-1988 连续热镀锌薄钢板和钢带

本标准适用于公称厚度为0.25～2.5mm的冷轧连续热镀锌薄钢板和钢带（以下简称钢板和钢带

Continual hot-dip zinc-coated steel sheets and strips

KS D 3506-2007 连续热镀锌薄钢板和钢带

이 규격은 질량 백분율로 97 % 이상의 아연을 함유한 도금조(다만, 일반적으로 알루미늄을

Hot-dip zinc-coated steel sheets and coils

YB/T 4213-2010 限制有害物质连续热镀锌（铝锌）钢板和钢带

Restriction of Hazardous Substances Continuous Hot-Dip Galvanized (Al-Zn) Steel Sheet and Strip

SIS SS-EN 10 147-1992 连续热浸镀锌结构钢板和钢带．交货技术条件

1.1 This European Standard specifies requirements for continuously hot-dip zinc coated flat products in thicknesses < 3,0 mm made of the steels given

Continuously hot-dip zinc coated structural steel sheet and strip — Technical delivery conditions

NF A36-325:1995 连续热浸镀铝锌薄钢板和钢带.交货技术条件

CONTINUOUSLY HOT-DIP ALUMINIUM-ZINC (AZ) COATED STEEL STRIP AND SHEET. TECHNICAL DELIVERY CONDITIONS. (EUROPEAN STANDARD EN 10215).

NF A36-323:1995 连续热浸镀锌铝薄钢板和钢带.交货技术条件

Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet. Technical delivery conditions.

prEN 10214-1992 连续热浸镀锌铝薄钢板和钢带.交货技术条件

Continuously hot-dip zinc-aluminium (ZA) coated steel sheet and strip; technical delivery conditions

prEN 10215-1992 连续热浸镀铝锌薄钢板和钢带.交货技术条件

Continuously hot-dip aluminium-zinc (AZ) coated steel sheet and strip; technical delivery conditions

ONORM EN 10147-1992 连续热镀锌结构钢薄钢板和钢带．技术交货条件

1.1 Diese Europ?ische Norm enth?lt die Anforderungen an kontinuierlich feuerverzinkte Flacherzeugnisse mit einer Dicke < 3,0 mm aus den in Tabelle

Continuously hot-dip zinc coated structural steel sheet and strip - Technical delivery conditions

EN 10215:1995 连续热浸镀铝锌薄钢板和钢带.交货技术条件;代替EN 10326 和 EN 10215-1995

Continuously Hot-Dip Aluminium-Zinc (AZ) Coated Steel Strip and Sheet - Technical Delivery Conditions Superseded by EN 10326 and EN 10215:1995

BS EN 10215:1995(1999 连续热浸镀铝锌薄钢板和钢带.交货技术条件;代替EN 10326 和 EN 10215-1995

Continuously Hot-Dip Aluminium-Zinc (AZ) Coated Steel Strip and Sheet - Technical Delivery Conditions Superseded by EN 10326 and EN 10215:1995

GB/T 2518-2019 连续热镀锌和锌合金镀层钢板及钢带

Continuously hot-dip zinc and zinc alloy coated steel sheet and strip

ONORM EN 10142-1991 冷成型用连续热镀锌低碳钢薄钢板和钢带．技术交货条件

1.1 Diese Europ?ische Norm enth?lt die Anforderungen an kontinuierlich feuerverzinkte Flacherzeugnisse mit - sofern bei der Bestellung nichts

Contlnuously hot-dip zinc coated low carbon steel sheet and strip for cold forming — Technical delivery conditions

GB/T 14978-1994 连续热浸镀铝锌硅合金镀层钢带和钢板

本标准规定了连续热浸镀铝锌硅合金镀层钢带和钢板（以下简称钢带和钢板）的尺寸、外形、技术要求、试验方法、验收规则及包装、标志、质量证明书等。 本标准适用于公称厚度0.25～2.50mm，公称宽度150～750mm的钢带和钢板。钢板由钢带剪切而成

Continual hot-dip aluminium zinc silicon alloy coated steel strips and sheets

UNI 5753-1975 非合金冷轧贴面平面钢成品．用于热浸泡的镀锌连续薄钢板和宽钢带

La presente norma riguarda le lamiere sottili ed i nastri larghi di acciaio non legato, laminati a freddo e zincati a caldo con procedimento continuo

GB/T 2518-1988 连续热镀锌薄钢板和钢带

本标准适用于公称厚度为0.25～2.5mm的冷轧连续热镀锌薄钢板和钢带（以下简称钢板和钢带

Continual hot-dip zinc-coated steel sheets and strips

KS D 3506-2007 连续热镀锌薄钢板和钢带

이 규격은 질량 백분율로 97 % 이상의 아연을 함유한 도금조(다만, 일반적으로 알루미늄을

Hot-dip zinc-coated steel sheets and coils

YB/T 4213-2010 限制有害物质连续热镀锌（铝锌）钢板和钢带

Restriction of Hazardous Substances Continuous Hot-Dip Galvanized (Al-Zn) Steel Sheet and Strip

SIS SS-EN 10 147-1992 连续热浸镀锌结构钢板和钢带．交货技术条件

1.1 This European Standard specifies requirements for continuously hot-dip zinc coated flat products in thicknesses < 3,0 mm made of the steels given

Continuously hot-dip zinc coated structural steel sheet and strip — Technical delivery conditions

NF A36-325:1995 连续热浸镀铝锌薄钢板和钢带.交货技术条件

CONTINUOUSLY HOT-DIP ALUMINIUM-ZINC (AZ) COATED STEEL STRIP AND SHEET. TECHNICAL DELIVERY CONDITIONS. (EUROPEAN STANDARD EN 10215).

NF A36-323:1995 连续热浸镀锌铝薄钢板和钢带.交货技术条件

Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet. Technical delivery conditions.

prEN 10214-1992 连续热浸镀锌铝薄钢板和钢带.交货技术条件

Continuously hot-dip zinc-aluminium (ZA) coated steel sheet and strip; technical delivery conditions

prEN 10215-1992 连续热浸镀铝锌薄钢板和钢带.交货技术条件

Continuously hot-dip aluminium-zinc (AZ) coated steel sheet and strip; technical delivery conditions

ONORM EN 10147-1992 连续热镀锌结构钢薄钢板和钢带．技术交货条件

1.1 Diese Europ?ische Norm enth?lt die Anforderungen an kontinuierlich feuerverzinkte Flacherzeugnisse mit einer Dicke < 3,0 mm aus den in Tabelle

Continuously hot-dip zinc coated structural steel sheet and strip - Technical delivery conditions

EN 10215:1995 连续热浸镀铝锌薄钢板和钢带.交货技术条件;代替EN 10326 和 EN 10215-1995

Continuously Hot-Dip Aluminium-Zinc (AZ) Coated Steel Strip and Sheet - Technical Delivery Conditions Superseded by EN 10326 and EN 10215:1995

BS EN 10215:1995(1999 连续热浸镀铝锌薄钢板和钢带.交货技术条件;代替EN 10326 和 EN 10215-1995

Continuously Hot-Dip Aluminium-Zinc (AZ) Coated Steel Strip and Sheet - Technical Delivery Conditions Superseded by EN 10326 and EN 10215:1995

GB/T 2518-2019 连续热镀锌和锌合金镀层钢板及钢带

Continuously hot-dip zinc and zinc alloy coated steel sheet and strip

ONORM EN 10142-1991 冷成型用连续热镀锌低碳钢薄钢板和钢带．技术交货条件

1.1 Diese Europ?ische Norm enth?lt die Anforderungen an kontinuierlich feuerverzinkte Flacherzeugnisse mit - sofern bei der Bestellung nichts

Contlnuously hot-dip zinc coated low carbon steel sheet and strip for cold forming — Technical delivery conditions

GB/T 14978-1994 连续热浸镀铝锌硅合金镀层钢带和钢板

本标准规定了连续热浸镀铝锌硅合金镀层钢带和钢板（以下简称钢带和钢板）的尺寸、外形、技术要求、试验方法、验收规则及包装、标志、质量证明书等。 本标准适用于公称厚度0.25～2.50mm，公称宽度150～750mm的钢带和钢板。钢板由钢带剪切而成

Continual hot-dip aluminium zinc silicon alloy coated steel strips and sheets

UNI 5753-1975 非合金冷轧贴面平面钢成品．用于热浸泡的镀锌连续薄钢板和宽钢带

La presente norma riguarda le lamiere sottili ed i nastri larghi di acciaio non legato, laminati a freddo e zincati a caldo con procedimento continuo