椎间融合器-轴向压缩沉降检测

YY/T 0960-2014 脊柱植入物 椎间融合器静态轴向压缩沉陷试验方法

本标准规定了用于促进某一特定脊柱节段融合的非生物椎间融合器轴向压缩沉陷试验所采用的材料和方法。本标准是用来对比椎间融合器的力学性能而非提供椎间融合器的性能标准,旨在为对比非生物椎间融合器的力学性能建立基本原则。本标准规定了一种静态试验方法,具体规定了载荷类型和加载方法。该试验方法可以用于椎间融合器的

Spinal implants.Standard test method for measuring load induced subsidence of intervertebral body fusion device under static axial compression

ASTM F2267-04 静态轴向压缩下测量椎间体融合器负载引起的沉降的标准试验方法

Intervertebral body fusion devices are generally simple geometric shaped devices, which are often porous or hollow in nature

Standard Test Method for Measuring Load Induced Subsidence of an Intervertebral Body Fusion Device Under Static Axial Compression

GOST R 57387-2017 外科植入物. 测量椎间体融合器械受静态轴向压缩负荷所致沉陷的标准试验方法

Implants for surgery. Standard test method for measuring load induced subsidence of intervertebral body fusion device under static axial compression

ASTM F2267-04(2018 用于测量静态轴向压缩下椎间融合器负荷诱导塌陷的标准测试方法

Standard Test Method for Measuring Load Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression

ASTM F2267-22 用于测量静态轴向压缩下椎间融合器负荷诱导塌陷的标准测试方法

1.1 This test method specifies the materials and methods for the axial compressive subsidence testing of non-biologic intervertebral body fusion

Standard Test Method for Measuring Load-Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression

ASTM F2267-04(2011 用于测量静态轴向压缩下椎间融合器负荷诱导塌陷的标准测试方法

1.1 This test method specifies the materials and methods for the axial compressive subsidence testing of non-biologic intervertebral body fusion

Standard Test Method for Measuring Load Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression

ASTM F2267-03 测量在静态轴向压缩下椎间体融合器件的负载引发衰耗的标准试验方法

1.1 This test method specifies the materials and methods for the axial compressive subsidence testing of non-biologic intervertebral body fusion

Standard Test Method for Measuring Load Induced Subsidence of an Intervertebral Body Fusion Device Under Static Axial Compression

ASTM F2077-17 椎间融合器试验方法

Test Methods For Intervertebral Body Fusion Devices

ASTM F2077-18 椎间融合器试验方法

1.1 This test method covers the materials and methods for the static and dynamic testing of intervertebral body fusion device assemblies, spinal

Test Methods For Intervertebral Body Fusion Devices

YY/T 1502-2016 脊柱植入物 椎间融合器

本标准规定了椎间融合器的术语和定义、预期性能、设计属性、材料、临床前评价、制造、灭菌、包装和制造商提供的信息。 本标准适用于放置在相邻椎体间椎间盘位置，为两个椎体的融合提供支持的椎间融合器。 本标准适用于由金属和聚合物材料制造的椎间融合器，不适用于药械组合产品(如：使用骨形态蛋白的椎间融合器

Spinal implants.Intervertebral body fusion devices

ASTM F2077-22 椎间融合器的标准试验方法

1.1 This test method covers the materials and methods for the static and dynamic testing of intervertebral body fusion device assemblies, spinal

Standard Test Methods for Intervertebral Body Fusion Devices

T/CSBM 0001-2021 脊柱植入物 增材制造钛合金椎间融合器

化学成分：化学成分应符合GB/T 13810中的规定。 显微组织：应明确增材制造的椎间融合器检测部位与打印方向的关系，并明确相应的显微组织特征。若经过热处理，需明确热处理工艺 孔径：应规定多孔结构的孔径。 丝径：应规定多孔结构的丝径。 孔隙率：应规定多孔结构的孔隙率。 外观

Additive manufacturing of titanium alloy intervertebral fusion cage for spinal implants

YY/T 0959-2014 脊柱植入物 椎间融合器力学性能试验方法

本标准规定了用于促进某一特定脊柱节段融合的椎间融合器的静态和动态试验,包括试验所用材料和方法。本标准的目的是为非生物椎间融合器的力学性能对比建立基本原则。本试验方法可以用来对比用在脊柱的不同位置和不同使用方法的椎间融合器的力学性能。本标准可以用于椎间融合器力学性能的对比,但不提供性能标准。本标准规定

Spinal implants.Test methods for mechanical property of intervertebral body fusion devices

ASTM F2077-03 椎间体融合设备的试验方法

1.1 This test method covers the materials and methods for the static and dynamic testing of intervertebral body fusion device assemblies, spinal

Test Methods For Intervertebral Body Fusion Devices

ASTM F2077-01 椎间体融合设备的试验方法

1.1 This test method covers the materials and methods for the static and dynamic testing of intervertebral body fusion device assemblies, spinal

Test Methods For Intervertebral Body Fusion Devices

YY/T 0960-2014 脊柱植入物 椎间融合器静态轴向压缩沉陷试验方法

本标准规定了用于促进某一特定脊柱节段融合的非生物椎间融合器轴向压缩沉陷试验所采用的材料和方法。本标准是用来对比椎间融合器的力学性能而非提供椎间融合器的性能标准,旨在为对比非生物椎间融合器的力学性能建立基本原则。本标准规定了一种静态试验方法,具体规定了载荷类型和加载方法。该试验方法可以用于椎间融合器的

Spinal implants.Standard test method for measuring load induced subsidence of intervertebral body fusion device under static axial compression

ASTM F2267-04 静态轴向压缩下测量椎间体融合器负载引起的沉降的标准试验方法

Intervertebral body fusion devices are generally simple geometric shaped devices, which are often porous or hollow in nature

Standard Test Method for Measuring Load Induced Subsidence of an Intervertebral Body Fusion Device Under Static Axial Compression

GOST R 57387-2017 外科植入物. 测量椎间体融合器械受静态轴向压缩负荷所致沉陷的标准试验方法

Implants for surgery. Standard test method for measuring load induced subsidence of intervertebral body fusion device under static axial compression

ASTM F2267-04(2018 用于测量静态轴向压缩下椎间融合器负荷诱导塌陷的标准测试方法

Standard Test Method for Measuring Load Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression

ASTM F2267-22 用于测量静态轴向压缩下椎间融合器负荷诱导塌陷的标准测试方法

1.1 This test method specifies the materials and methods for the axial compressive subsidence testing of non-biologic intervertebral body fusion

Standard Test Method for Measuring Load-Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression

ASTM F2267-04(2011 用于测量静态轴向压缩下椎间融合器负荷诱导塌陷的标准测试方法

1.1 This test method specifies the materials and methods for the axial compressive subsidence testing of non-biologic intervertebral body fusion

Standard Test Method for Measuring Load Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression

ASTM F2267-03 测量在静态轴向压缩下椎间体融合器件的负载引发衰耗的标准试验方法

1.1 This test method specifies the materials and methods for the axial compressive subsidence testing of non-biologic intervertebral body fusion

Standard Test Method for Measuring Load Induced Subsidence of an Intervertebral Body Fusion Device Under Static Axial Compression

ASTM F2077-17 椎间融合器试验方法

Test Methods For Intervertebral Body Fusion Devices

ASTM F2077-18 椎间融合器试验方法

1.1 This test method covers the materials and methods for the static and dynamic testing of intervertebral body fusion device assemblies, spinal

Test Methods For Intervertebral Body Fusion Devices

YY/T 1502-2016 脊柱植入物 椎间融合器

本标准规定了椎间融合器的术语和定义、预期性能、设计属性、材料、临床前评价、制造、灭菌、包装和制造商提供的信息。 本标准适用于放置在相邻椎体间椎间盘位置，为两个椎体的融合提供支持的椎间融合器。 本标准适用于由金属和聚合物材料制造的椎间融合器，不适用于药械组合产品(如：使用骨形态蛋白的椎间融合器

Spinal implants.Intervertebral body fusion devices

ASTM F2077-22 椎间融合器的标准试验方法

1.1 This test method covers the materials and methods for the static and dynamic testing of intervertebral body fusion device assemblies, spinal

Standard Test Methods for Intervertebral Body Fusion Devices

T/CSBM 0001-2021 脊柱植入物 增材制造钛合金椎间融合器

化学成分：化学成分应符合GB/T 13810中的规定。 显微组织：应明确增材制造的椎间融合器检测部位与打印方向的关系，并明确相应的显微组织特征。若经过热处理，需明确热处理工艺 孔径：应规定多孔结构的孔径。 丝径：应规定多孔结构的丝径。 孔隙率：应规定多孔结构的孔隙率。 外观

Additive manufacturing of titanium alloy intervertebral fusion cage for spinal implants

YY/T 0959-2014 脊柱植入物 椎间融合器力学性能试验方法

本标准规定了用于促进某一特定脊柱节段融合的椎间融合器的静态和动态试验,包括试验所用材料和方法。本标准的目的是为非生物椎间融合器的力学性能对比建立基本原则。本试验方法可以用来对比用在脊柱的不同位置和不同使用方法的椎间融合器的力学性能。本标准可以用于椎间融合器力学性能的对比,但不提供性能标准。本标准规定

Spinal implants.Test methods for mechanical property of intervertebral body fusion devices

ASTM F2077-03 椎间体融合设备的试验方法

1.1 This test method covers the materials and methods for the static and dynamic testing of intervertebral body fusion device assemblies, spinal

Test Methods For Intervertebral Body Fusion Devices

ASTM F2077-01 椎间体融合设备的试验方法

1.1 This test method covers the materials and methods for the static and dynamic testing of intervertebral body fusion device assemblies, spinal

Test Methods For Intervertebral Body Fusion Devices