医用超声设备与探头频率特性检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

YY/T 1142-2013 医用超声设备与探头频率特性的测试方法

本标准规定了频率范围在0.5 MHz~15 MHz内的医用超声设备(以下简称设备)与探头频率特性的测试方法与相关参数的计算方法。本标准适用于工作在连续波、准连续波或脉冲波状态的各类医用超声设备与探头

Methods of measuring the frequency of medical ultrasonic equipment and probe

YY/T 1142-2003 医用超声诊断和监护设备.频率特性的测试方法

 本标准规定了频率范围在0.5MHz~15MHz内的超声诊断和监护设备频率特性的测量方法。 本标准适用于工作在连续波、准连续波或脉冲波状态的各类超声诊断设备和超声监护设备,这些设备可以配用单晶片发-收型探头、双单晶片发-收分开型探头,多晶片梅花型探头、机械扇扫探头、线性探头、凸阵

Methods of measuring the frequency of medical diagnostic and monitoring ultrasonic equipment

AS/NZS 4190:1994 超声波.声场.在0.5MHz至15MHz频率范围内采用水听器测量与表征医用超声设备声场特性的导则

Provides guidance on the practical measurement of the acoustic output of various types of medical ultrasonic equipment in the frequency range of 0.5

Ultrasonics - Fields - Guidance for the measurement and characterization of ultrasonic fields generated by medical ultrasonic equipment using hydrophones in the frequency range 0.5 MHz to 15 MHz

YY/T 1088-2007 在0.5MHz至15MHz频率范围内采用水听器测量与表征医用超声设备声场特性的导则

本标准就 0.5MHz 至 15 MHz 频率范围内采用水听器法对各类医用超声设备声输出进行的实际测量提供了指南。 本标准给出了医用超声设备声输出测量的简化步骤和指南,以及对因使用有限带宽和有限敏感元件尺寸的水听器所引起的限制进行修正的步骤

Guidance for the measurement and characterization of ultrasonic fields generated by medical ultrasonic equipment using hydrophones in the frequency range 0.5MHz to 15MHz

CSN 36 4860-1975 医疗诊断用超声探头

Zpracovatel: Státní v?zkumn? ústav pro stavbu stroj?, Běchovice Ing. Miroslav Vatras Pracovník ??adu pro normalizaci a mě?ení: Ing. Jarmila Krejsov

Ultrasonic protes for medical diagnosing

BS EN 12668-2:2001 损检验.超声波检验设备的特性和验证.探头

This European standard covers probes used for ultrasonic non-destructive examination in the following categories with centre frequencies in the range

Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Probes

BS EN 12668-2:2010 损检验.超声波检验设备的特性和验证.探头

This European Standard covers probes used for ultrasonic non-destructive examination in the following categories with centre frequencies in the range

Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Probes

BS EN 61220:1995 超声波学.场.频率范围0.5MHz-15MHz超声波医疗设备含水听诊器引起的超声场的特性和测量指南

Includes procedures for correcting for limitations caused by use of hydrophones with finite bandwidth and active element size

Ultrasonics - Fields - Guidance for the measurement and characterization of ultrasonic fields generated by medical ultrasonic equipment using hydrophones in the frequency range 0.5 MHz to 15 MHz

NF C97-907:1995 超声场.使用频率范围在0.5MHz至15MHz 水下听音器的医疗超声设备所产生的超声场的测量和特性化指南

Ultrasonics fields. Guidance for the measurement and characterization of ultrasonic fields generate by medical ultrasonic equipment using hydrophones in the frequency range 0,5 MHz to 15 MHz.

DB31/T 1343-2022 医用超声探头消毒卫生要求

GB/T 27664.2-2011 损检测.超声检测设备的性能与检验.第2部分:探头

GB/T27664 的本部分规定了下列两类聚焦或非聚焦式超声损检测用探头及其检验方法=a)产生横波或纵波的单换能器或双换能器接触式探头; h)液浸式探头a 本部分中规定的与材料有关的超声数值,是基于纵波超声声速为〈5 920士5O)m/s和横波超声声速为〔3 255土30)m/s 的钢。 2

Non-destructive testing.Characterization and verification of ultrasonic test equipment.Part 2:Probes

JIS Z 2350:1992 超声探头性能特征测量方法

Method for measurement of performance characteristics of ultrasonic probes

JIS Z 2350:2002 超声探头性能特征测量方法

この規格は,公称周波数0.5 MHz以上15 MHz以下の超音波探触子(以下,“探触子”という。)の性能測定方法について規定する

Method for measurement of performance characteristics of ultrasonic probes

JB/T 10062-1999 超声探伤用探头性能测试方法

Testing methods for performance of probes used in ultrasonic flaw detection

EN ISO 22232-2:2020 损检测 超声检测设备的性能与检验 第2部分:探头

This document specifies the characteristics of probes used for non-destructive ultrasonic testing in the following categories with centre frequencies

Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020)

YY/T 1142-2013 医用超声设备与探头频率特性的测试方法

本标准规定了频率范围在0.5 MHz~15 MHz内的医用超声设备(以下简称设备)与探头频率特性的测试方法与相关参数的计算方法。本标准适用于工作在连续波、准连续波或脉冲波状态的各类医用超声设备与探头

Methods of measuring the frequency of medical ultrasonic equipment and probe

YY/T 1142-2003 医用超声诊断和监护设备.频率特性的测试方法

 本标准规定了频率范围在0.5MHz~15MHz内的超声诊断和监护设备频率特性的测量方法。 本标准适用于工作在连续波、准连续波或脉冲波状态的各类超声诊断设备和超声监护设备,这些设备可以配用单晶片发-收型探头、双单晶片发-收分开型探头,多晶片梅花型探头、机械扇扫探头、线性探头、凸阵

Methods of measuring the frequency of medical diagnostic and monitoring ultrasonic equipment

AS/NZS 4190:1994 超声波.声场.在0.5MHz至15MHz频率范围内采用水听器测量与表征医用超声设备声场特性的导则

Provides guidance on the practical measurement of the acoustic output of various types of medical ultrasonic equipment in the frequency range of 0.5

Ultrasonics - Fields - Guidance for the measurement and characterization of ultrasonic fields generated by medical ultrasonic equipment using hydrophones in the frequency range 0.5 MHz to 15 MHz

YY/T 1088-2007 在0.5MHz至15MHz频率范围内采用水听器测量与表征医用超声设备声场特性的导则

本标准就 0.5MHz 至 15 MHz 频率范围内采用水听器法对各类医用超声设备声输出进行的实际测量提供了指南。 本标准给出了医用超声设备声输出测量的简化步骤和指南,以及对因使用有限带宽和有限敏感元件尺寸的水听器所引起的限制进行修正的步骤

Guidance for the measurement and characterization of ultrasonic fields generated by medical ultrasonic equipment using hydrophones in the frequency range 0.5MHz to 15MHz

CSN 36 4860-1975 医疗诊断用超声探头

Zpracovatel: Státní v?zkumn? ústav pro stavbu stroj?, Běchovice Ing. Miroslav Vatras Pracovník ??adu pro normalizaci a mě?ení: Ing. Jarmila Krejsov

Ultrasonic protes for medical diagnosing

BS EN 12668-2:2001 损检验.超声波检验设备的特性和验证.探头

This European standard covers probes used for ultrasonic non-destructive examination in the following categories with centre frequencies in the range

Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Probes

BS EN 12668-2:2010 损检验.超声波检验设备的特性和验证.探头

This European Standard covers probes used for ultrasonic non-destructive examination in the following categories with centre frequencies in the range

Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Probes

BS EN 61220:1995 超声波学.场.频率范围0.5MHz-15MHz超声波医疗设备含水听诊器引起的超声场的特性和测量指南

Includes procedures for correcting for limitations caused by use of hydrophones with finite bandwidth and active element size

Ultrasonics - Fields - Guidance for the measurement and characterization of ultrasonic fields generated by medical ultrasonic equipment using hydrophones in the frequency range 0.5 MHz to 15 MHz

NF C97-907:1995 超声场.使用频率范围在0.5MHz至15MHz 水下听音器的医疗超声设备所产生的超声场的测量和特性化指南

Ultrasonics fields. Guidance for the measurement and characterization of ultrasonic fields generate by medical ultrasonic equipment using hydrophones in the frequency range 0,5 MHz to 15 MHz.

DB31/T 1343-2022 医用超声探头消毒卫生要求

GB/T 27664.2-2011 损检测.超声检测设备的性能与检验.第2部分:探头

GB/T27664 的本部分规定了下列两类聚焦或非聚焦式超声损检测用探头及其检验方法=a)产生横波或纵波的单换能器或双换能器接触式探头; h)液浸式探头a 本部分中规定的与材料有关的超声数值,是基于纵波超声声速为〈5 920士5O)m/s和横波超声声速为〔3 255土30)m/s 的钢。 2

Non-destructive testing.Characterization and verification of ultrasonic test equipment.Part 2:Probes

JIS Z 2350:1992 超声探头性能特征测量方法

Method for measurement of performance characteristics of ultrasonic probes

JIS Z 2350:2002 超声探头性能特征测量方法

この規格は,公称周波数0.5 MHz以上15 MHz以下の超音波探触子(以下,“探触子”という。)の性能測定方法について規定する

Method for measurement of performance characteristics of ultrasonic probes

JB/T 10062-1999 超声探伤用探头性能测试方法

Testing methods for performance of probes used in ultrasonic flaw detection

EN ISO 22232-2:2020 损检测 超声检测设备的性能与检验 第2部分:探头

This document specifies the characteristics of probes used for non-destructive ultrasonic testing in the following categories with centre frequencies

Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020)

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

⏱

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

我司旗下实验室具备CMA资质认定及CNAS认可,具体项目是否在资质认定/实验室认可范围内请与工程师确认。

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

➔
02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

➔
03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

➔
04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

➔
05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。

VR实验室720°全景 NEW · 全新上线 VR实验室上线啦! 720°全景实景观览 · 足不出户走进实验室 立即体验 检测咨询 · 立即在线沟通