橡胶软管及软管组合件 致密钢丝编织增强液压型检测

GB/T 39313-2020 橡胶软管及软管组合件 输送石油基或水基流体用致密钢丝编织增强液压型 规范

本标准规定了五种型别的致密钢丝编织增强软管及软管组合件的要求,其公称内径范围为5 至31.5。这些软管适用于 ———ISO6743 4 定义的油基液压流体HH、HL、HM、HR和HV,温度范围为-40 ℃~+100 ℃ ; ———ISO6743 4 定义的水基液压流体HFC、HFAE、HFAS和

Rubber hoses and hose assemblies—Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids—Specification

EN 853:2015 橡胶软管和软管组件.钢丝编织增强液压型.分类

This European Standard specifies requirements for four types of wire braid reinforced hoses and hose assemblies of nominal bore from 5 to 51

Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification

DS/EN 853/AC:2007 橡胶软管和软管组件 钢丝编织增强液压型 规范

This standard specifies requirements for four types of wire braid reinforced hoses and hose assemblies of nominal bore from 5 to 51. The standard does

Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification

DS/EN 853:1997 橡胶软管和软管组件 钢丝编织增强液压型 规范

This standard specifies requirements for four types of wire braid reinforced hoses and hose assemblies of nominal bore from 5 to 51. The standard does

Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification

LST EN 853-2000 橡胶软管和软管组件 钢丝编织增强液压型 规范

Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification

LST EN 853-2000/AC-2007 橡胶软管和软管组件 钢丝编织增强液压型 规范

Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification

DIN EN 853:2016-09 橡胶软管和软管组件 钢丝编织增强液压型 规范

Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification; German version EN 853:2015

UNE-EN 853:2015 橡胶软管和软管组件 钢丝编织增强液压型 规范

Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification

GB/T 3683-1992 钢丝增强液压橡胶软管和软管组合件

本标准规定了内径为5～51mm钢丝增强液压橡胶软管的各项技术要求和试验方法。 本标准适用于使用普通液压液体（如矿物油、可溶性油、油水乳浊液、乙二醇水溶液及水等）、工作温度范围为-40℃到100℃的钢丝增强液压橡胶软管。 本标准不适用于蓖麻油基和酯基液体。 本标准不包括对端部

Rubber hoses and hose assemblies-wire reinforced hydraulic type

prEN 853-1992 橡胶软管和软管组件.钢丝编织增强液力型.规范

Rubber hoses and hose assemblies; wire braid reinforced hydraulic type; specification

GB/T 3683.1-2006 橡胶软管及软管组合件.钢丝编织增强液压型.规范.第1部分;油基流体适用

GB/T 3683的本部分规定了公称内经为5～51的8个型别钢丝编织增强橡胶软管组合件的要求。它们适用于符合GB/T 7631.2要求的HH、HL、HM、HR和HV液压流体，工作温度范围为-40℃～+100℃。 本部分未包括对管接头的要求，只限于对软管和软管组合件性能的要求

Rubber hoses and hose assemblies.Wire-braid-reinforced hydraulic types.Specification.Part 1:Oil-based fluid applications

GB/T 3683-2011 橡胶软管及软管组合件 油基或水基流体适用的钢丝编织增强液压型 规范

本标准规定了公称内径为5～51的六个型别的钢丝编织增强型软管及软管组合件的要求,其中R2ATS型多一个公称内径为63的规格。在-40℃～+60℃的温度范围内适用于GB/T 7631.2定义的HFC、HFAE、HFAS和HFB水基液压流体,或在-40℃～+100℃温度范围内适用于GB/T 7631.2

Rubber hoses and hose assemblies—Wire-braid-reinforced hydraulic types for oil-based or water-based fluids—Specification

DLA MIL-DTL-52471/5 C-2008 软管，橡胶，液压型，100R2 型双丝编织增强软管

HOSE, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100R2 DOUBLE-WIRE-BRAIDED REINFORCEMENT HOSE

BS EN 853:2015 跟踪更改 橡胶软管和软管组件 钢丝编织增强液压型 规格

Tracked Changes. Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification

DLA MIL-DTL-52471/3 C-2008 软管总成，橡胶，液压型，100RE 型，四线编织增强或多根钢丝编织钢丝增强软管

HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100RE, FOUR-WIRE BRAIDED REINFORCEMENT OR MULTIPLE WIRE BRAIDED STEEL WIRE REINFORCED HOSE

GB/T 39313-2020 橡胶软管及软管组合件 输送石油基或水基流体用致密钢丝编织增强液压型 规范

本标准规定了五种型别的致密钢丝编织增强软管及软管组合件的要求,其公称内径范围为5 至31.5。这些软管适用于 ———ISO6743 4 定义的油基液压流体HH、HL、HM、HR和HV,温度范围为-40 ℃~+100 ℃ ; ———ISO6743 4 定义的水基液压流体HFC、HFAE、HFAS和

Rubber hoses and hose assemblies—Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids—Specification

EN 853:2015 橡胶软管和软管组件.钢丝编织增强液压型.分类

This European Standard specifies requirements for four types of wire braid reinforced hoses and hose assemblies of nominal bore from 5 to 51

Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification

DS/EN 853/AC:2007 橡胶软管和软管组件 钢丝编织增强液压型 规范

This standard specifies requirements for four types of wire braid reinforced hoses and hose assemblies of nominal bore from 5 to 51. The standard does

Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification

DS/EN 853:1997 橡胶软管和软管组件 钢丝编织增强液压型 规范

This standard specifies requirements for four types of wire braid reinforced hoses and hose assemblies of nominal bore from 5 to 51. The standard does

Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification

LST EN 853-2000 橡胶软管和软管组件 钢丝编织增强液压型 规范

Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification

LST EN 853-2000/AC-2007 橡胶软管和软管组件 钢丝编织增强液压型 规范

Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification

DIN EN 853:2016-09 橡胶软管和软管组件 钢丝编织增强液压型 规范

Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification; German version EN 853:2015

UNE-EN 853:2015 橡胶软管和软管组件 钢丝编织增强液压型 规范

Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification

GB/T 3683-1992 钢丝增强液压橡胶软管和软管组合件

本标准规定了内径为5～51mm钢丝增强液压橡胶软管的各项技术要求和试验方法。 本标准适用于使用普通液压液体（如矿物油、可溶性油、油水乳浊液、乙二醇水溶液及水等）、工作温度范围为-40℃到100℃的钢丝增强液压橡胶软管。 本标准不适用于蓖麻油基和酯基液体。 本标准不包括对端部

Rubber hoses and hose assemblies-wire reinforced hydraulic type

prEN 853-1992 橡胶软管和软管组件.钢丝编织增强液力型.规范

Rubber hoses and hose assemblies; wire braid reinforced hydraulic type; specification

GB/T 3683.1-2006 橡胶软管及软管组合件.钢丝编织增强液压型.规范.第1部分;油基流体适用

GB/T 3683的本部分规定了公称内经为5～51的8个型别钢丝编织增强橡胶软管组合件的要求。它们适用于符合GB/T 7631.2要求的HH、HL、HM、HR和HV液压流体，工作温度范围为-40℃～+100℃。 本部分未包括对管接头的要求，只限于对软管和软管组合件性能的要求

Rubber hoses and hose assemblies.Wire-braid-reinforced hydraulic types.Specification.Part 1:Oil-based fluid applications

GB/T 3683-2011 橡胶软管及软管组合件 油基或水基流体适用的钢丝编织增强液压型 规范

本标准规定了公称内径为5～51的六个型别的钢丝编织增强型软管及软管组合件的要求,其中R2ATS型多一个公称内径为63的规格。在-40℃～+60℃的温度范围内适用于GB/T 7631.2定义的HFC、HFAE、HFAS和HFB水基液压流体,或在-40℃～+100℃温度范围内适用于GB/T 7631.2

Rubber hoses and hose assemblies—Wire-braid-reinforced hydraulic types for oil-based or water-based fluids—Specification

DLA MIL-DTL-52471/5 C-2008 软管，橡胶，液压型，100R2 型双丝编织增强软管

HOSE, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100R2 DOUBLE-WIRE-BRAIDED REINFORCEMENT HOSE

BS EN 853:2015 跟踪更改 橡胶软管和软管组件 钢丝编织增强液压型 规格

Tracked Changes. Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification

DLA MIL-DTL-52471/3 C-2008 软管总成，橡胶，液压型，100RE 型，四线编织增强或多根钢丝编织钢丝增强软管

HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100RE, FOUR-WIRE BRAIDED REINFORCEMENT OR MULTIPLE WIRE BRAIDED STEEL WIRE REINFORCED HOSE