筒形砂套检测

JB/T 10042-1999 筒形砂套

本标准规定了筒形砂套的代号、标记、尺寸及公差、技术要求和检验规则。 本标准适用于以砂布、砂纸制成的筒形砂套

Cylindrical sand sleeves

GB/T 30473-2013 涂附磨具 筒形砂套

本标准规定了安装在手持式磨削机上符合ISO15637一I要求的和安装在固定式磨削机上符合ISO15637署要求的夹紧装置上的砂套的尺寸、公差和试验条件n 本标准适用于以砂布、砂纸制成的筒形砂套

Coated abrasives.Cylindrical abrasive sleeves

DIN ISO 2421:2004 涂覆磨料.筒形砂套

Coated abrasives - Cylindrical sleeves (ISO 2421:2003)

JB/T 10042-2018 涂附磨具 筒形砂套 技术条件

Technical conditions for coated abrasive cylindrical sand sleeves

DIN ISO 15637-2:2004 筒形砂套的夹紧装置.第2部分:固定磨床的夹紧装置

This part of ISO 15637 applies to holding fixtures for use with cylindrical abrasive sleeves with D more than 100 mm in accordance with ISO 2421

Holding fixtures of cylindrical abrasive sleeves - Part 2: Holding fixtures for stationary machines (ISO 15637-2:2002)

GB/T 30474.2-2013 筒形砂套夹紧装置 第2部分:用于固定式磨削机上的夹紧装置

GB/T 30474的本部分规定了用于固定式磨削机上的筒形砂套夹紧装置的型式、尺寸、要求、标记、标志。本部分适用于符合GB/T 30473中D>100 mm的筒形砂套使用的夹紧装置。此类夹紧装置采用不同的方式夹紧筒形砂套,例如用片状芯或气动装置

Holding fixtures of cylindrical abrasive sleeves.Part 2:Holding fixtures for stationary machines

GB/T 30474.1-2013 筒形砂套夹紧装置 第1部分:用于手持式磨削机上的带轴夹紧装置

GB/T 30474的本部分规定了用于手持式磨削机上的筒形砂套带轴夹紧装置的型式和尺寸、要求、标记、标志。本部分适用于符合GB/T 30473-2013中D≤100 mm的筒形砂套使用的带轴夹紧装置。此类带轴夹紧装置通常为片状芯,通过离心力作用于薄片上导致直径的增加从而把筒形砂套夹紧在夹紧装置上

Holding fixtures of cylindrical abrasive sleeves.Part 1:Holding fixtures with shank for hand-held grinding machines

JIS R 6257:1994 圆柱形套筒式砂轮

Cylindrical abrasive sleeves

JIS R 6257:1999 圆柱形套筒式砂轮.名称和尺寸

Cylindrical abrasive sleeves -- Designation and dimensions

BS ISO 15637-1:2002 圆柱形研磨套筒支承夹具.手动砂轮机用带柄的支承夹具

This part of ISO 15637 applies to holding fixtures with shank for use with cylindrical abrasive sleeves with D ≤ 100 mm in accordance with ISO 2421

Holding fixtures of cylindrical abrasive sleeves - Holding fixtures with shank for hand-held grinding machines

ISO 2421:2003 砂布.桶形砂套

This International Standard specifies dimensions, tolerances and test conditions for cylindrical abrasive sleeves mounted on holding fixtures

Coated abrasives - Cylindrical sleeves

NF E75-075*NF ISO 2421:2004 砂布 桶形砂套

Coated abrasives - Cylindrical sleeves

HB 565-1974 弓形套筒

bow sleeve

HB 565-1989 弓形套筒

bow sleeve

AS 2740:2001(R2014 楔形套筒

Specifies requirements for general purpose wedge-type sockets. It does not cover wedge-type sockets of welded construction, for special purpose

JB/T 10042-1999 筒形砂套

本标准规定了筒形砂套的代号、标记、尺寸及公差、技术要求和检验规则。 本标准适用于以砂布、砂纸制成的筒形砂套

Cylindrical sand sleeves

GB/T 30473-2013 涂附磨具 筒形砂套

本标准规定了安装在手持式磨削机上符合ISO15637一I要求的和安装在固定式磨削机上符合ISO15637署要求的夹紧装置上的砂套的尺寸、公差和试验条件n 本标准适用于以砂布、砂纸制成的筒形砂套

Coated abrasives.Cylindrical abrasive sleeves

DIN ISO 2421:2004 涂覆磨料.筒形砂套

Coated abrasives - Cylindrical sleeves (ISO 2421:2003)

JB/T 10042-2018 涂附磨具 筒形砂套 技术条件

Technical conditions for coated abrasive cylindrical sand sleeves

DIN ISO 15637-2:2004 筒形砂套的夹紧装置.第2部分:固定磨床的夹紧装置

This part of ISO 15637 applies to holding fixtures for use with cylindrical abrasive sleeves with D more than 100 mm in accordance with ISO 2421

Holding fixtures of cylindrical abrasive sleeves - Part 2: Holding fixtures for stationary machines (ISO 15637-2:2002)

GB/T 30474.2-2013 筒形砂套夹紧装置 第2部分:用于固定式磨削机上的夹紧装置

GB/T 30474的本部分规定了用于固定式磨削机上的筒形砂套夹紧装置的型式、尺寸、要求、标记、标志。本部分适用于符合GB/T 30473中D>100 mm的筒形砂套使用的夹紧装置。此类夹紧装置采用不同的方式夹紧筒形砂套,例如用片状芯或气动装置

Holding fixtures of cylindrical abrasive sleeves.Part 2:Holding fixtures for stationary machines

GB/T 30474.1-2013 筒形砂套夹紧装置 第1部分:用于手持式磨削机上的带轴夹紧装置

GB/T 30474的本部分规定了用于手持式磨削机上的筒形砂套带轴夹紧装置的型式和尺寸、要求、标记、标志。本部分适用于符合GB/T 30473-2013中D≤100 mm的筒形砂套使用的带轴夹紧装置。此类带轴夹紧装置通常为片状芯,通过离心力作用于薄片上导致直径的增加从而把筒形砂套夹紧在夹紧装置上

Holding fixtures of cylindrical abrasive sleeves.Part 1:Holding fixtures with shank for hand-held grinding machines

JIS R 6257:1994 圆柱形套筒式砂轮

Cylindrical abrasive sleeves

JIS R 6257:1999 圆柱形套筒式砂轮.名称和尺寸

Cylindrical abrasive sleeves -- Designation and dimensions

BS ISO 15637-1:2002 圆柱形研磨套筒支承夹具.手动砂轮机用带柄的支承夹具

This part of ISO 15637 applies to holding fixtures with shank for use with cylindrical abrasive sleeves with D ≤ 100 mm in accordance with ISO 2421

Holding fixtures of cylindrical abrasive sleeves - Holding fixtures with shank for hand-held grinding machines

ISO 2421:2003 砂布.桶形砂套

This International Standard specifies dimensions, tolerances and test conditions for cylindrical abrasive sleeves mounted on holding fixtures

Coated abrasives - Cylindrical sleeves

NF E75-075*NF ISO 2421:2004 砂布 桶形砂套

Coated abrasives - Cylindrical sleeves

HB 565-1974 弓形套筒

bow sleeve

HB 565-1989 弓形套筒

bow sleeve

AS 2740:2001(R2014 楔形套筒

Specifies requirements for general purpose wedge-type sockets. It does not cover wedge-type sockets of welded construction, for special purpose