钢铁与合金材料及制品检测

GOST R 58765-2019 钢铁及合金金属制品 术语和定义

Steel and alloy metal products. Terms and definitions

KS D ISO 13583-2-2005(2010 离心铸钢及合金制品第2部分:耐热材料

Centrifugally cast steel and alloy products－Part 2：Heat resistant materials

AD 2000-Merkblatt W3/2-2000 压力容器材料.铸铁材料.球墨铸铁非合金及低合金

The AD 2000 body of regulations can be applied to satisfy the basic safety requirements of the Pressure Equipment Directive, principally

Materials for pressure vessels.Cast iron materials.Spheroidal-graphite cast iron non-alloy and low alloy

AD 2000-Merkblatt W3/2-2015 压力容器材料.铸铁材料.球墨铸铁非合金及低合金

Materials for pressure vessels.Cast iron materials.Spheroidal-graphite cast iron non-alloy and low alloy

NBN 291-1952 铁；钢材；生铁及合金硫含量的测定

BS ISO 13583-2:2015 离心铸造钢及合金产品.耐热材料

Centrifugally cast steel and alloy products. Heat-resistant materials

BS ISO 13583-2:2003 离心铸造钢及合金产品.耐热材料

This part of ISO 13583 specifies cast steel and alloy grades for elevated temperature service pieces manufactured by centrifugal casting

Centrifugally cast steel and alloy products - Heat resistant materials

BS ISO 13583-2:2023 离心铸造钢及合金产品 耐热材料

1   Scope This document specifies cast steel and nickel alloy grades for elevated temperature service products manufactured by centrifugal

Centrifugally cast steel and alloy products. Heat-resistant materials

MSZ 5738-1986 非合金以及轻微合金制钢铁制造工作用普通技术产品

JB/T 8063.1-1996 粉末冶金材料与制品化学分析方法 铁基材料与制品中碳的测定（气体容量法）

本标准规定了用气体容量法测定碳。 本标准适用于铁基粉末冶金制品中碳的测定，其范围0.1%～2.0

Method for chemical analysis of powder metallurgy materials and products Determination of carbon in iron-based materials and products (gas volumetric method)

JB/T 8063.8-1996 粉末冶金材料与制品化学分析方法 铜基材料与制品中铁的测定（EDTA—H2O2光度法）

本标准规定了用EDTA-H|(2)O|(2)光度法测定铁量。 本标准适用于粉末冶金铜基制品中铁量的测定。测定范围<4

Chemical analysis method of powder metallurgy materials and products Determination of iron in copper-based materials and products (EDTA—H2O2 photometry)

JIS G 0567:1993 钢铁材料及耐热合金的高温拉力试验方法

Method of elevated temperature tensile test for steels and heat-resisting alloys

JB/T 8063.3-1996 粉末冶金材料与制品化学分析方法 铁基材料与制品中钼的测定（硫氰酸盐光度法）

本标准规定了用硫氰酸盐光度法测定钼量。 本标准适用于粉末冶金铁基制品中钼量的测定。测定范围：0.10%～2.00

Method for chemical analysis of powder metallurgy materials and products Determination of molybdenum in iron-based materials and products (thiocyanate photometry)

CNS 12089-1987 钢铁底材之铅与铅锡合金电镀层

本标准适用于钢铁底材之铅与铅锡合金电镀 (以下简称电镀)。备考(1)：铅锡合金电镀层中，锡的最大含量为 15

Electroplated Coatings of Lead and Lead-Tin Alloys on Iron and Steel

JB/T 8063.1-2011 粉末冶金材料与制品化学分析方法.第1部分：铁基材料与制品中碳的测定（气体容量法）

JB/T 8063的本部分规定了测定范围为0.1％～2.0％、用气体容量法测定粉末冶金铁基材料与制品中的碳含量的方法、试剂与仪器、分析步聚、分析结果的计算、碳量的测定以及试验报告。 本部分适用于粉末冶金铁基材料与制品中碳量的测定

Methods for chemical analysis of powder metallurgy materials and products.Part 1:The gas volumetric method for the determination of carbon in iron-based materials and products

GOST R 58765-2019 钢铁及合金金属制品 术语和定义

Steel and alloy metal products. Terms and definitions

KS D ISO 13583-2-2005(2010 离心铸钢及合金制品第2部分:耐热材料

Centrifugally cast steel and alloy products－Part 2：Heat resistant materials

AD 2000-Merkblatt W3/2-2000 压力容器材料.铸铁材料.球墨铸铁非合金及低合金

The AD 2000 body of regulations can be applied to satisfy the basic safety requirements of the Pressure Equipment Directive, principally

Materials for pressure vessels.Cast iron materials.Spheroidal-graphite cast iron non-alloy and low alloy

AD 2000-Merkblatt W3/2-2015 压力容器材料.铸铁材料.球墨铸铁非合金及低合金

Materials for pressure vessels.Cast iron materials.Spheroidal-graphite cast iron non-alloy and low alloy

NBN 291-1952 铁；钢材；生铁及合金硫含量的测定

BS ISO 13583-2:2015 离心铸造钢及合金产品.耐热材料

Centrifugally cast steel and alloy products. Heat-resistant materials

BS ISO 13583-2:2003 离心铸造钢及合金产品.耐热材料

This part of ISO 13583 specifies cast steel and alloy grades for elevated temperature service pieces manufactured by centrifugal casting

Centrifugally cast steel and alloy products - Heat resistant materials

BS ISO 13583-2:2023 离心铸造钢及合金产品 耐热材料

1   Scope This document specifies cast steel and nickel alloy grades for elevated temperature service products manufactured by centrifugal

Centrifugally cast steel and alloy products. Heat-resistant materials

MSZ 5738-1986 非合金以及轻微合金制钢铁制造工作用普通技术产品

JB/T 8063.1-1996 粉末冶金材料与制品化学分析方法 铁基材料与制品中碳的测定（气体容量法）

本标准规定了用气体容量法测定碳。 本标准适用于铁基粉末冶金制品中碳的测定，其范围0.1%～2.0

Method for chemical analysis of powder metallurgy materials and products Determination of carbon in iron-based materials and products (gas volumetric method)

JB/T 8063.8-1996 粉末冶金材料与制品化学分析方法 铜基材料与制品中铁的测定（EDTA—H2O2光度法）

本标准规定了用EDTA-H|(2)O|(2)光度法测定铁量。 本标准适用于粉末冶金铜基制品中铁量的测定。测定范围<4

Chemical analysis method of powder metallurgy materials and products Determination of iron in copper-based materials and products (EDTA—H2O2 photometry)

JIS G 0567:1993 钢铁材料及耐热合金的高温拉力试验方法

Method of elevated temperature tensile test for steels and heat-resisting alloys

JB/T 8063.3-1996 粉末冶金材料与制品化学分析方法 铁基材料与制品中钼的测定（硫氰酸盐光度法）

本标准规定了用硫氰酸盐光度法测定钼量。 本标准适用于粉末冶金铁基制品中钼量的测定。测定范围：0.10%～2.00

Method for chemical analysis of powder metallurgy materials and products Determination of molybdenum in iron-based materials and products (thiocyanate photometry)

CNS 12089-1987 钢铁底材之铅与铅锡合金电镀层

本标准适用于钢铁底材之铅与铅锡合金电镀 (以下简称电镀)。备考(1)：铅锡合金电镀层中，锡的最大含量为 15

Electroplated Coatings of Lead and Lead-Tin Alloys on Iron and Steel

JB/T 8063.1-2011 粉末冶金材料与制品化学分析方法.第1部分：铁基材料与制品中碳的测定（气体容量法）

JB/T 8063的本部分规定了测定范围为0.1％～2.0％、用气体容量法测定粉末冶金铁基材料与制品中的碳含量的方法、试剂与仪器、分析步聚、分析结果的计算、碳量的测定以及试验报告。 本部分适用于粉末冶金铁基材料与制品中碳量的测定

Methods for chemical analysis of powder metallurgy materials and products.Part 1:The gas volumetric method for the determination of carbon in iron-based materials and products